We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbon steel jaw coupling hub, 3/4 inch bore, straight jaws, set screw locking

Lovejoy

Lovejoy L075 3/4" Jaw Coupling Hub

SKU CH-NDRF-JNDPJ

Connects shafts up to 11,000 RPM with a 3/4 inch bore and set-screw locking

  • 3/4 in bore fits common shafts
  • Carbon steel hub handles 11 000 RPM
  • Set-screw lock secures hub without extra parts
  • Works with Buna-N, Urethane or Hytrel spiders
  • Delivers up to 0.36 hp at 100 RPM

L075 Jaw Coupling Hub for 3/4 inch Shafts

This carbon steel hub accepts a 3/4 inch round bore with a standard keyway and set screw locking. It suits general power transmission duties where a straight jaw profile and inch series dimensions are required. Builders needing a larger bore or metric series should look elsewhere.

Rated to 11000 RPM with interchangeable spider

At 100 RPM the hub transmits 0.14 hp with a Buna N spider, 0.21 hp with a Urethane spider and 0.36 hp with a Hytrel spider. Higher speeds or torque demands will exceed these ratings and require a larger coupling size.

Solid steel construction runs without lubrication

The hub itself adds no moving parts beyond the spider element so noise and heat depend on the chosen spider material and alignment. Misalignment or worn spiders will increase vibration and temperature in normal operation.

Highlights

  • 3/4 in bore fits common shafts
  • Carbon steel hub handles 11 000 RPM
  • Set-screw lock secures hub without extra parts
  • Works with Buna-N, Urethane or Hytrel spiders
  • Delivers up to 0.36 hp at 100 RPM

Specifications

No published specifications for this item yet.

Questions about this item

Will the 3/4 in bore with 3/16 in keyway fit the motor shaft I already use?

The hub has a 3/4 in round bore with a 3/16 in keyway and 3/32 in keyway depth, so match those dimensions to your shaft before installing.

How can I confirm the L075 hub is running correctly once installed?

With the spider fitted the hub is rated to 11,000 RPM and delivers 0.14 hp at 100 RPM with Buna-N, 0.21 hp with Urethane or 0.36 hp with Hytrel — verify speed and vibration are within those limits.

Does the box include a spider or do I need to order one separately?

Only the carbon-steel hub is supplied; a compatible L075H Buna-N, L075N Urethane or L075U Hytrel spider must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.