We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 male plug to silver DC 7.9x5.4mm female jack adapter

LORDWORLD

LORDWORLD XT60 Male SC100 to DC 7.9x5.4mm Female Fast Charging Adapter

SKU CH-XKMF-RPJ3R

Connects an XT60 battery to a DC 7.9x5.4mm device such as a TS100 soldering iron, supporting SC100 fast-charging protocol for field repairs

  • Powers TS100 soldering iron directly from XT60 batteries for field repairs
  • SC100 protocol enables fast charging via 7.9 x 5.4 mm DC output
  • High-temperature resistant materials maintain insulation under heavy RC loads
  • Plug-and-play XT60 male to DC female connection requires no soldering
  • Compatible with FPV drones, quadcopters, solar setups and RC vehicles

XT60 Male SC100 to DC 7.9×5.4mm Adapter

This new LORDWORLD adapter converts an XT60 male connector to a DC 7.9×5.4mm female jack. It targets FPV pilots, drone operators and hobbyists who power TS100 soldering irons or other DC devices from RC LiPo battery packs in the field. The plug-and-play design requires no tools or soldering.

SC100 Protocol Enables Fast Charging Handshake

The SC100 protocol support allows the adapter to negotiate higher voltage or current with compatible power sources, so a TS100 iron can reach its rated heating speed quickly. High-temperature-resistant materials and insulation keep the connection stable during sustained loads typical of field repairs.

Limited to XT60 Sources and 7.9×5.4mm DC Loads

The adapter only works with batteries or power packs that provide an XT60 female output and devices that accept a 7.9×5.4mm DC barrel plug. It cannot connect to other battery connector types, larger barrel sizes or USB-PD chargers without additional converters.

Highlights

  • Powers TS100 soldering iron directly from XT60 batteries for field repairs
  • SC100 protocol enables fast charging via 7.9 x 5.4 mm DC output
  • High-temperature resistant materials maintain insulation under heavy RC loads
  • Plug-and-play XT60 male to DC female connection requires no soldering
  • Compatible with FPV drones, quadcopters, solar setups and RC vehicles

Specifications

BrandLORDWORLD

Questions about this item

Will the XT60 connector or the 7.9×5.4 mm DC jack need replacement after repeated field use?

Both connectors use high-temperature-resistant, well-insulated materials rated for repeated plug-and-play cycles in FPV and aeromodelling applications.

What is the first limit reached when powering a TS100 soldering iron continuously from a LiPo battery through this adapter?

The SC100 protocol caps the negotiated power at 100 W, so sustained draw above that will be the limiting factor.

Does the adapter generate noticeable heat or noise when running a TS100 iron all day at the field?

The adapter is passive with no fan; it relies on the high-temperature-resistant housing to dissipate heat silently during extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.