We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A compact black USB-C enclosure with 12+6 and 17+7 pin connectors for MacBook Air Pro 2010 2011

LORDWORLD

LORDWORLD USB3.0 Type-C to 12+6Pin/17+7Pin Enclosure 5Gbps for Mac Air Pro 2010 2011

SKU CH-EVNZ-R3GY1

USB-C enclosure connects 12+6-pin and 17+7-pin SSDs from 2010-2011 MacBook Air and Pro models at 5Gbps over USB 3.0

  • Up to 5 Gbps transfers via JMS580 bridge
  • Plug-and-play Type-C USB 3.0 with hot-swap support
  • Fits 12+6 pin or 17+7 pin Apple SSDs
  • Powers drives with up to 3 A at 5 V
  • Compatible with 2010-2011 MacBook Air and Pro models

Type-C USB 3.0 Enclosure for 2010–2011 MacBook

This USB-C enclosure connects Apple proprietary SSDs with 12+6-pin or 17+7-pin connectors to a modern host. It uses a JMS580 bridge controller to provide a 5 Gbps USB 3.0 link and supports plug-and-play with hot-swapping. The SSD itself is not included. The adapter is aimed at owners of 2010 or 2011 MacBook Air and Pro models who want to access data from their original drive.

Suits owners of listed MacBook Air

It works with MacBook Air models A1370 and A1369, including part numbers MC503, MC504, MC505, MC506.2010, MC965, MC966, MC968 and MC969. Builders who need to read drives with a different pin count or a later Apple SSD revision should look elsewhere. The enclosure does not support drives that draw more than 3 A or require a 3.1 A or later interface.

12+6-pin or 17+7-pin Apple SSD connector required

The single deciding factor is whether the target SSD uses the exact 12+6-pin or 17+7-pin contact layout shown in the product photos. If the drive has a different connector, the enclosure will not function. The JMS580 chipset bridges that connector to USB 3.0 at 5 Gbps, with backward compatibility to USB 2.0 at 480 Mbps and USB 1.1 at 1.5 Mbps.

Highlights

  • Up to 5 Gbps transfers via JMS580 bridge
  • Plug-and-play Type-C USB 3.0 with hot-swap support
  • Fits 12+6 pin or 17+7 pin Apple SSDs
  • Powers drives with up to 3 A at 5 V
  • Compatible with 2010-2011 MacBook Air and Pro models

Specifications

BrandLORDWORLD

Questions about this item

Will the 5 Gbps link saturate before the JMS580 chipset hits a thermal limit during long transfers?

The JMS580 bridge controller is rated for USB 3.0 5 Gbps upstream; sustained throughput will be limited by the 5 Gbps bus rather than a published thermal ceiling.

Does the enclosure need active cooling or does it stay quiet when powered at 3 A all day?

No fan is included; the aluminium shell passively dissipates heat from the JMS580 and the SSD while the Type-C port supplies up to 3 A.

Which proprietary SSD pinout must the drive already have to fit this enclosure?

The drive must use the 12+6-pin or 17+7-pin Apple connector used in 2010-2011 MacBook Air and Pro models such as A1369, A1370, MC503-MC506, MC965-MC969.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.