We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LORDWORLD

LORDWORLD USB-C Female to DC 4.5x3.0mm PD Cable 0.2m 65-100W 18-20V HP

SKU CH-T0KH-XM0B2

Converts a 65-100W USB-C charger to a 4.5x3.0mm 18-20V DC plug for HP laptops

  • Charges HP laptops via USB-C PD using built-in trigger
  • Accepts 65-100W USB-C input, delivers 18-20V DC output
  • 5x3.0mm barrel fits compatible HP power ports
  • 2m length keeps desk setup tidy
  • Requires USB-C charger rated above laptop power draw

HP Laptop DC Adapter Cable

This 0.2 m cable converts a USB-C female input into a 4.5x3.0 mm DC male connector for HP laptops that require 18-20 V power. It contains a built-in PD trigger so the attached charger can negotiate the correct voltage. The cable is designed solely for compatible HP models with this barrel size.

Installation Notes

Plug a 65-100 W USB-C charger into the female end and connect the DC tip to the laptop; the trigger handles voltage negotiation automatically. The charger must supply at least the laptop’s required wattage, otherwise charging will not start or will be unreliable. No drivers or configuration are needed.

Capacity and Limits

The adapter passes 18-20 V at up to 100 W from a suitable USB-C source, covering most standard HP barrel-jack laptops. It does not support 5 V output, so it cannot charge low-voltage devices or power banks. Length is fixed at 0.2 m, limiting placement flexibility between the wall charger and the laptop.

Highlights

  • Charges HP laptops via USB-C PD using built-in trigger
  • Accepts 65-100W USB-C input, delivers 18-20V DC output
  • 5x3.0mm barrel fits compatible HP power ports
  • 2m length keeps desk setup tidy
  • Requires USB-C charger rated above laptop power draw

Specifications

BrandLORDWORLD

Questions about this item

How can I confirm the cable is delivering 18-20V to my HP laptop after connecting a 65W-100W USB-C charger?

The built-in PD emulator trigger negotiates 18-20V from the charger; if the laptop charges normally, the cable is working as intended.

What comes in the box and what must I supply separately?

The 0.2m cable with USB-C female input and 4.5x3.0mm DC male output is included; you must provide a 65W-100W USB-C charger.

Which charger capacity should I choose for this cable?

Use any USB-C charger rated 65W to 100W; the charger power must exceed the laptop's required input for reliable operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.