LORDWORLD
LORDWORLD USB 2.0 Male to 3.5mm 1.35mm DC Barrel 90° Cable 100cm
Delivers 5 V from a USB 2.0 port to devices using a 3.5 mm by 1.35 mm barrel jack via a right-angled 90 degree connector on a 100 cm cable
- Right-angled 90° connector fits tight spaces
- USB 2.0 male supplies 5 V DC power
- 5 mm × 1.35 mm barrel fits compatible devices
- 100 cm cable length gives flexible placement
- Powers small electronics from any USB port
Purpose and fit
This adapter cable converts a standard USB 2.0 port into a 5 V DC supply for devices that accept a 3.5 mm by 1.35 mm barrel jack. It is intended for users powering small electronics such as routers, LED strips or audio modules from a laptop, power bank or wall charger. Buyers needing a different barrel diameter or a straight connector will not find a match here.
Build and daily use
The right-angled 90 degree barrel plug reduces strain on the device socket and keeps the cable close to the chassis in tight spaces. A USB 2.0 Type-A plug on the host side ensures broad compatibility with existing ports. The one hundred centimetre length gives enough reach for desk or rack routing without excessive slack.
What the bundle adds
Only the single cable is supplied; no additional tips, voltage regulators or mounting hardware are included. The fixed 5 V output means the connected device must operate at that voltage and draw within the host port's current limit. No software or driver installation is required for operation.
Highlights
- Right-angled 90° connector fits tight spaces
- USB 2.0 male supplies 5 V DC power
- 5 mm × 1.35 mm barrel fits compatible devices
- 100 cm cable length gives flexible placement
- Powers small electronics from any USB port
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What voltage does the USB 2.0 end supply to the 3.5 mm barrel?
The cable delivers 5 V DC from the USB 2.0 male connector to the 3.5 mm barrel plug.
Will the 90° right-angled barrel fit my device's 3.5 mm by 1.35 mm jack?
Yes, the right-angled 90° barrel is sized for a 3.5 mm outer diameter and 1.35 mm inner diameter jack.
How do I connect the cable so the right-angle points the right way?
Insert the USB 2.0 male end into the power source, then push the 3.5 mm barrel firmly into the device jack until it seats.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



