We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A green circuit-board carrier with a U.2 connector and an E1.S slot

LORDWORLD

LORDWORLD U.2 SFF-8639 to E1.S NVMe Carrier Adapter Gen-Z P4511 PCIe 4.0

SKU CH-C4B7-GKBY0

Converts an E1.S NVMe drive to a U.2 SFF-8639 slot with PCIe 4.0 support

  • Converts E1.S NVMe to U.2 SFF-8639 for server use
  • Adds EDSFF E1.S slot via U.2 host interface
  • Supports PCI Express 4.0 bandwidth for NVMe drives
  • Enables GEN-Z E1.S SSD connection in standard systems
  • Compatible with DC P4511 Series EDSFF NVMe SSD

U.2 SFF-8639 to E1.S Carrier Adapter

This LORDWORLD adapter converts an EDSFF E1.S NVMe SSD into a U.2 SFF-8639 form factor. It enables the use of ruler-style SSDs in systems equipped with U.2 backplanes. The card installs internally through a standard U.2 interface. It targets data centre, server and IoT deployments needing this specific conversion.

For U.2 backplane integration only

The adapter suits builders adding E1.S drives like the DC P4511 to existing U.2 infrastructure. It does not suit users without a U.2 host connector or those requiring M.2 or PCIe add-in card interfaces. Buyers needing hot-plug carrier features beyond the basic conversion should verify their chassis compatibility first.

PCI Express 4.0 compliant interface

The converter operates at PCI Express 4.0 speeds across the U.2 link. This single specification determines whether the host system can deliver full throughput to the connected E1.S SSD. Systems limited to earlier PCIe versions will restrict the drive to lower performance.

Highlights

  • Converts E1.S NVMe to U.2 SFF-8639 for server use
  • Adds EDSFF E1.S slot via U.2 host interface
  • Supports PCI Express 4.0 bandwidth for NVMe drives
  • Enables GEN-Z E1.S SSD connection in standard systems
  • Compatible with DC P4511 Series EDSFF NVMe SSD

Specifications

BrandLORDWORLD

Questions about this item

Does the PCIe 4.0 link on this U.2 carrier adapter add noticeable heat or power draw during all-day server use?

The adapter is a passive carrier with no active components, so it adds no extra heat or power beyond the installed E1.S SSD itself.

What existing interface must my chassis or backplane provide for this LORDWORLD carrier to work?

Your system needs a U.2 SFF-8639 bay or cable to accept the carrier's connector.

Will an older PCIe 3.0 backplane still let me use this E1.S-to-U.2 adapter with a DC P4511 SSD?

Yes, the PCIe 4.0 carrier is backward compatible and will run at PCIe 3.0 speeds on a 3.0 backplane.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.