We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Slimline SAS 8654 74-pin to dual Oculink 8611 cable, 50cm

LORDWORLD

LORDWORLD Slimline SAS 4.0 SFF-8654 8i 74pin to Dual Oculink SFF-8611 Cable 50cm

SKU CH-9QGR-DRC0V

Connects a Slimline SAS 4.0 SFF-8654 8i 74pin port to two Oculink SFF-8611 connectors at 24Gbps per channel over 50cm

  • Saves internal space with compact 74-pin Slimline connector
  • Dual Oculink SFF-8611 ends carry four signal channels
  • 24 Gbps SAS throughput per channel for fast storage links
  • 8 GT/s PCIe rate per lane meets Gen 4.0 spec
  • 50 cm length fits tight chassis routing

LORDWORLD Slimline SAS 4.0 Cable

This LORDWORLD cable connects a single Slimline SAS SFF-8654 8i 74-pin port to two Oculink SFF-8611 connectors. It measures 50 centimetres in length. The assembly supports SAS 4.0 and PCIe Gen3/4 specifications for internal data links.

Suits tight enclosures and dual-drive backplanes

Builders working in compact servers or storage arrays use this cable to split one 8-lane controller port into two 4-lane device connections. It is not for external chassis links or single-drive cabling where a straight-through lead is required.

24 Gbps per SAS channel

Each of the four lanes carries 24 gigabits per second for SAS traffic and 8 GT/s for PCIe traffic. This bandwidth ceiling determines whether the cable matches the controller and drive speeds in your configuration.

Highlights

  • Saves internal space with compact 74-pin Slimline connector
  • Dual Oculink SFF-8611 ends carry four signal channels
  • 24 Gbps SAS throughput per channel for fast storage links
  • 8 GT/s PCIe rate per lane meets Gen 4.0 spec
  • 50 cm length fits tight chassis routing

Specifications

BrandLORDWORLD

Questions about this item

What space does the SFF-8654 74-pin connector save?

The smaller connector and cable design reduces the space needed inside the device compared with larger legacy connectors.

How do I connect the dual SFF-8611 ends correctly?

Align each Oculink SFF-8611 plug with its port and press straight in until the latch clicks; forcing it at an angle bends the pins.

When should I replace this 50 cm cable?

Replace it if the latch no longer holds, the cable jacket is kinked, or signal errors appear at the rated 24 Gbps per channel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.