We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Internal SFF-8087 male to external SFF-8088 female cable with low profile bracket

LORDWORLD

LORDWORLD SFF-8087 Male to SFF-8088 Female Cable 50cm Low Profile Bracket

SKU CH-7MQK-XFEX5

Connects internal 8087 Mini SAS to external 8088 Mini SAS at up to 12 Gb/s with a 50 cm cable and low-profile bracket

  • Supports 12Gb/s SAS throughput for fast data transfer
  • 50cm length suits compact server builds
  • SFF-8087 male to SFF-8088 female connects internal to external
  • Low-profile bracket fits tight chassis slots
  • Locking 26-pin SFF-8088 connector secures external links

Connectivity Purpose

This cable bridges an internal SFF-8087 male connector to an external SFF-8088 female port. It allows a server or workstation chassis to route SAS links to an outside enclosure or backplane. The 50cm length suits short runs inside a rack or between adjacent units.

Fit and Limitations

It suits administrators adding external JBODs or tape drives to an existing HBA or RAID card. Builders needing an internal-to-internal link or a different bracket height should look at other options. The low-profile bracket fits only low-profile slots.

Decisive Specification

The assembly complies with the SAS 2.1 standard and supports 12Gb/s transfer rates across the SFF-8088 26pin interface. This rating determines whether the link can sustain the throughput your drives and controller expect.

Highlights

  • Supports 12Gb/s SAS throughput for fast data transfer
  • 50cm length suits compact server builds
  • SFF-8087 male to SFF-8088 female connects internal to external
  • Low-profile bracket fits tight chassis slots
  • Locking 26-pin SFF-8088 connector secures external links

Specifications

BrandLORDWORLD

Questions about this item

Will the 26-pin SFF-8088 connector need periodic re-seating to maintain 12Gb/s speeds?

The SFF-8088 interface locks into place, so the 26-pin connector stays secure without scheduled re-seating under normal use.

What limits sustained 12Gb/s throughput first on this 50cm cable?

Signal integrity over the 50cm length and the four-lane SAS 2.1 specification set the practical ceiling for continuous 12Gb/s transfers.

Does the low-profile bracket or cable generate noticeable heat during all-day SAS traffic?

The passive copper assembly has no active components, so it adds negligible heat and draws no extra power during extended operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.