LORDWORLD
LORDWORLD SATA III 3.0 22Pin Male-Female 90° Down Angled Extension Cable 30cm
A 30 cm SATA 3.0 extension cable with a 90° down angled 22-pin male-to-female connector carries 6 Gbps data plus 12 V and 5 V power for 2.5" and 3.5" drives in tight spaces
- Fits 2.5" and 3.5" SATA drives with combined power and data
- 90° down angle reaches ports in tight spaces
- 30 cm length gives flexible routing inside the case
- Carries 5 V and 12 V on five wires plus ground
- Supports SATA III 6 Gbps data transfer
22-Pin SATA Extension Cable
This 22-pin SATA male-to-female cable extends both data and power connections for 2.5 and 3.5-inch drives. It carries 12 V and 5 V lines plus ground wires through a 30 cm length. The 90-degree down-angled connector fits tight spaces around motherboard or backplane ports. Builders and up-graders use it when the stock cable cannot reach or align cleanly.
90-Degree Down-Angled Connector
The right-angle plug bends downward so the cable runs parallel to the board instead of projecting outward. This clears adjacent components, drive cages or chassis walls that would block a straight header. It accepts a standard 22-pin SATA female port and maintains the full pinout for simultaneous data and power delivery.
6 Gbps Data with 30 cm Reach
The link supports SATA 3.0 speeds up to 6 Gbps while supplying 12 V and 5 V power to the drive. At 30 cm it bridges short gaps inside compact cases or between stacked drives without excess slack. Longer runs or external enclosures need a different length; this cable is built for internal, close-quarter routing only.
Highlights
- Fits 2.5" and 3.5" SATA drives with combined power and data
- 90° down angle reaches ports in tight spaces
- 30 cm length gives flexible routing inside the case
- Carries 5 V and 12 V on five wires plus ground
- Supports SATA III 6 Gbps data transfer
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What does the 6Gbps data rate mean for my drive's actual speed?
The 6Gbps SATA III link matches the drive and controller; real-world throughput depends on the specific drive used.
Which SATA standard does the 22-pin connector follow?
It follows the SATA III 3.0 specification for combined 12V, 5V power and 6Gbps data.
How much clearance does the 90° down-angled plug need?
The right-angle design lets the cable sit flush in tight spots where a straight connector would not fit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



