LORDWORLD
LORDWORLD Right-Angled 4-in-1 NEMA 5-15R/5-20R/6-15R/6-20R 15A/20A 125V/250V Receptacle
A right-angled 4-in-1 receptacle accepting NEMA 5-15, 5-20, 6-15 and 6-20 plugs at 15A or 20A, 125V or 250V
- Four NEMA socket types in one unit for flexible wiring
- Right-angled design routes cables neatly in tight enclosures
- Rated for 15 A and 20 A at 125 V and 250 V
- Nylon housing shields live parts and resists heat rise
- Internal dust shield keeps terminals clean for reliable contact
Four-in-One NEMA Receptacle
This right-angled unit combines NEMA 5-15R, 5-20R, 6-15R and 6-20R sockets in a single housing. It accepts 15 and 20 amp plugs at both 125 and 250 volts. The design suits industrial and commercial environments where multiple plug types must be supported from one mounting point.
Polarised Heavy-Duty Construction
A nylon housing insulates the hand-held side while metal blades and contacts resist heat rise. The polarised, two-pole, three-wire grounding layout meets standard wiring practice. An internal dust shield keeps terminals free of contaminants during daily use.
Replaces Separate Single-Type Outlets
Installers can consolidate four receptacle styles into one gang box, reducing wall clutter and wiring time. The jump is worthwhile when equipment mixes 125 and 250 volt plugs; it is not for circuits limited to a single voltage class.
Highlights
- Four NEMA socket types in one unit for flexible wiring
- Right-angled design routes cables neatly in tight enclosures
- Rated for 15 A and 20 A at 125 V and 250 V
- Nylon housing shields live parts and resists heat rise
- Internal dust shield keeps terminals clean for reliable contact
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
Which NEMA receptacle types does the 4-in-1 connector accept?
The unit combines NEMA 5-15R, 5-20R, 6-15R and 6-20R female sockets in one housing, covering 15 A and 20 A at both 125 V and 250 V.
What wiring configuration and mounting style does the receptacle use?
It is a polarized, 2-pole, 3-wire grounding device with a right-angled body and straight-blade terminals designed for industrial or commercial panel mounting.
How should the wires be terminated to avoid a common installation error?
Connect hot, neutral and ground to the clearly marked screw terminals; the mistake is reversing hot and neutral on the 250 V plugs, which have no neutral — verify the device accepts 110–240 V before wiring 6-15P or 6-20P plugs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



