LORDWORLD
LORDWORLD Right Angle 4-in-1 12AWG 15A to 20A T-Blade Adapter Cable 6FT
A right-angle 12 AWG cable converts a 15 A 125 V household plug to four NEMA receptacles up to 20 A 250 V
- Connect 15 A 125 V plugs to 20 A 250 V T-blade outlets
- Right-angle 12 AWG cable fits tight spaces behind equipment
- Four NEMA outlet types covered in one 6 ft adapter
- Heavy-duty 12 AWG wire supports 15 A and 20 A loads
- Single 5-15P male plug powers 5-15R, 5-20R, 6-15R and 6-20R receptacles
Right-Angle 4-in-1 Adapter Cable
This LORDWORLD adapter cable converts a single NEMA 5-15P 15-amp 125-volt plug into four different outlet types. The right-angle design reduces strain on wall sockets. It suits users who need to connect equipment with 5-15R, 5-20R, 6-15R or 6-20R inlets to a standard household receptacle.
Suits mixed-voltage equipment racks
Ideal for installers who run both 125-volt and 250-volt devices from one 15-amp branch circuit. Not for buyers who need a higher input rating than 15 amps or who require a locking connector. Also unsuitable where a straight plug is mandatory.
Handles four outlet standards
Comfortably serves devices fitted with 15-amp 125-volt, 20-amp 125-volt, 15-amp 250-volt or 20-amp 250-volt inlets. The 12AWG conductors support the stated 15-amp input limit. It cannot supply more than the source circuit allows.
Highlights
- Connect 15 A 125 V plugs to 20 A 250 V T-blade outlets
- Right-angle 12 AWG cable fits tight spaces behind equipment
- Four NEMA outlet types covered in one 6 ft adapter
- Heavy-duty 12 AWG wire supports 15 A and 20 A loads
- Single 5-15P male plug powers 5-15R, 5-20R, 6-15R and 6-20R receptacles
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What type of wall outlet does the 5-15P plug on this adapter require?
The 5-15P male plug fits a standard 125V 15-amp household receptacle.
If I keep an older 5-15R device, can I still use it with this adapter?
Yes, one of the four female ports is a 5-15R 15-amp 125V outlet that accepts your existing 5-15P plug.
How can I confirm the adapter is delivering power to a 6-20R device after setup?
The connected 20-amp 250V equipment should power on normally, showing the 6-20R outlet is live.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



