We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCIe 4.0 x8 adapter card with two OCuLink SFF-8612 ports and mounting holes

LORDWORLD

LORDWORLD PCIe 4.0 x8 Detachable to Dual OCuLink SFF-8612 SFF-8611 VROC Raid0 Adapter

SKU CH-1KBP-HRM7N

A PCIe 4.0 x8 card splits one detachable slot into two OCuLink SFF-8612 ports for SSD or eGPU use at up to 64 Gbps

  • Adds two OCuLink ports from one PCIe 4.0 x8 slot
  • 64 Gbps bandwidth with PCIe 4.0 protocol support
  • Backward compatible with PCIe 3.0 devices
  • Works with GPUs SSDs and expansion cards
  • Requires motherboard with bifurcation for dual-drive RAID 0

PCIe 4.0 x8 to Dual OCuLink Adapter

This adapter converts a single detachable PCIe 4.0 x8 slot into two external OCuLink SFF-8612 ports. It enables connection of U.2 SSDs or eGPU enclosures using optional cables. The card transmits PCIe 4.0 signals at up to 64Gbps and remains backward compatible with PCIe 3.0. Fixing holes allow secure installation in compact systems.

Builders with Splittable PCIe Lanes

The adapter only functions on motherboards that support PCIe lane bifurcation or detachable PCIe channels. Without signal splitting the host will recognise only one attached drive. Systems lacking this firmware feature should look at alternative connectivity methods. Laptops and small form factor hosts benefit from the compact bracket design.

Bifurcation Requirement for Dual Drives

Dual-drive operation depends entirely on the motherboard ability to split the incoming x8 electrical link into two x4 links. If the platform cannot bifurcate the lane only a single device will be detected. Verify the host documentation for PCIe splitting support before purchase.

Highlights

  • Adds two OCuLink ports from one PCIe 4.0 x8 slot
  • 64 Gbps bandwidth with PCIe 4.0 protocol support
  • Backward compatible with PCIe 3.0 devices
  • Works with GPUs SSDs and expansion cards
  • Requires motherboard with bifurcation for dual-drive RAID 0

Specifications

BrandLORDWORLD

Questions about this item

Does the adapter ship with the cables needed to connect two U.2 SSDs or an eGPU?

The adapter provides two external OCuLink SFF-8612 female ports and a PCI Express connector. Cables for SFF-8611 or SFF-8612 are not included and must be purchased separately.

My board only has a PCIe 3.0 x8 slot — will both OCuLink ports still work?

The card is backward compatible with PCIe 3.0, but it requires a motherboard that can split the PCIe 4.0 x8 channel. Without channel splitting only one of the two OCuLink ports will be recognised.

The listing mentions 64 Gbps — what does that mean for a single drive?

64 Gbps is the aggregate PCIe 4.0 x8 bandwidth. A single drive connected through one OCuLink port will be limited to the x4 lane width of that port, not the full x8 figure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.