We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCI-E 3.0 adapter card with dual SATA ports and three M.2 slots

LORDWORLD

LORDWORLD PCI-E 3.0 & Dual SATA to NGFF NVME MSATA M-Key B/M-Key SSD Card Adapter 3in1

SKU CH-HGR0-QGRAK

Connects three M.2 or mSATA SSDs via one PCI-E 3.0 slot and two SATA ports with no extra power needed

  • Connect three SSDs simultaneously via a single PCI-E 3.0 slot
  • Power all drives directly from the PCI-E slot without extra cables
  • Supports M.2 sizes 2230, 2242, 2260 and 2280 for flexible storage
  • Works with MSATA and NGFF B/M-key SSDs using SATA connections
  • Driver-free operation on Windows 10 with Z97 or newer motherboards

3-in-1 M.2 SATA NVMe adapter

This LORDWORLD adapter lets a single PCI Express 3.0 slot host up to three solid-state drives simultaneously. It accepts M-key NVMe modules and both B-key and B/M-key SATA modules in 2230 2242 2260 and 2280 lengths alongside a full-size mSATA drive. The card draws all power from the PCI Express slot so no extra cables are required. A Z97 or newer motherboard running Windows 10 or later is needed for operation.

Sustained multi-drive operation

Because each drive connects through its native pathway the adapter maintains consistent throughput when all three SSDs are active at once. The NVMe device uses the PCI Express 3.0 lanes directly while the two SATA devices each occupy a motherboard SATA port via the included cables. No driver installation is necessary so the operating system manages the workload without added software overhead.

NVMe versus SATA M.2 keying

The single specification that decides compatibility is the M-key notch on the NVMe module versus the B-key or B/M-key notch on SATA modules. Only an M-key drive can use the PCI Express pathway; B-key and B/M-key drives must route through the SATA cables. Builders who need more than one NVMe device or who lack a Z97-class motherboard cannot use this card for that purpose.

Highlights

  • Connect three SSDs simultaneously via a single PCI-E 3.0 slot
  • Power all drives directly from the PCI-E slot without extra cables
  • Supports M.2 sizes 2230, 2242, 2260 and 2280 for flexible storage
  • Works with MSATA and NGFF B/M-key SSDs using SATA connections
  • Driver-free operation on Windows 10 with Z97 or newer motherboards

Specifications

BrandLORDWORLD

Questions about this item

Does the PCI-E 3.0 adapter generate extra heat or noise when three SSDs run all day?

The card draws power only from the PCI-E slot with no extra connectors, so it adds no active cooling and runs silently under normal loads.

What motherboard and OS must I already have for the 3-in-1 adapter to work?

You need a Z97 or newer motherboard with a free PCI-E 3.0 slot and at least two SATA ports, plus Windows 10 or later.

Can I keep my older SATA SSDs while adding an NVME M-key drive on this card?

Yes — the three slots operate simultaneously: two SATA-connected slots for MSATA or B/M-key drives and one PCI-E lane for an NVME M-key SSD.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.