We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with M.2 slot and Oculink connectors

LORDWORLD

LORDWORLD Oculink SFF-8612 SFF-8611 to M.2 Kit NGFF M-Key to NVME PCIe SSD 2280 22110mm Adapter

SKU CH-E72Y-S0ZAZ

Connects M.2 NVME SSDs in 2230, 2242, 2260, 2280 and 22110 sizes to a system via SFF-8611 or SFF-8612 Oculink using a PCIe 3.0 x4 controller

  • Supports multiple M.2 NVME SSD lengths from 2230 to 22110mm
  • Connects via SFF-8611 or SFF-8612 Oculink interface for internal installation
  • Operates on PCIe 3.0 x4 lanes for high-speed NVME storage
  • Designed exclusively for NVME PCIe SSDs, not compatible with SAS or SATA drives
  • Compact converter kit enables U.2 to M.2 NVME connectivity in supported systems

M.2 NVMe adapter for Oculink SFF-8611/8612

This kit connects a single M.2 NVMe SSD to a system through an internal Oculink SFF-8611 or SFF-8612 interface. It supports drive lengths of 2230, 2242, 2260, 2280 and 22110 millimetres. The adapter is aimed at builders adding PCIe storage to platforms that expose Oculink ports on the mainboard. It does not serve users who need SATA or SAS connectivity.

Passive PCIe 3.0 x4 operation

The board runs as a passive PCIe 3.0 x4 link with no active cooling or onboard power regulation. Thermals and noise depend entirely on the host chassis airflow and the installed SSD. Power draw is limited to what the Oculink connection and the drive itself require. Buyers who need active cooling or external power delivery will not find it here.

Mounting hardware for internal installs

The package includes screws and standoffs to secure the adapter and the M.2 drive inside a case. No driver disc, management software or cabling is bundled. The hardware simply enables mechanical installation; configuration is handled by the host firmware. Users expecting bundled cables or a software suite will need to source them separately.

Highlights

  • Supports multiple M.2 NVME SSD lengths from 2230 to 22110mm
  • Connects via SFF-8611 or SFF-8612 Oculink interface for internal installation
  • Operates on PCIe 3.0 x4 lanes for high-speed NVME storage
  • Designed exclusively for NVME PCIe SSDs, not compatible with SAS or SATA drives
  • Compact converter kit enables U.2 to M.2 NVME connectivity in supported systems

Specifications

BrandLORDWORLD

Questions about this item

How do I install the M.2 NVME SSD into the SFF-8612 Oculink adapter correctly?

Insert the SSD at an angle into the M-Key slot matching its length — 2230, 2242, 2260, 2280 or 22110 — press down and secure with the screw; then plug the SFF-8611 or SFF-8612 Oculink cable into the board.

What maintenance or replacement will the Oculink-to-M.2 adapter need over time?

The adapter itself has no moving parts or wear items; only the attached NVME SSD may eventually require replacement when its write endurance is reached.

What bandwidth limit appears first when the PCIe 3.0 x4 Oculink link runs sustained workloads?

The PCIe 3.0 x4 interface caps throughput at the 3.0 x4 lane rate, so sustained transfers cannot exceed that ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.