We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with Oculink and SATA connectors, M.2 slot, silver bracket

LORDWORLD

LORDWORLD Oculink SFF-8612 8611 to U.2 Kit M-Key NVME PCIe 3.0 x4 NGFF SATA Adapter

SKU CH-G2XN-X3SAQ

Connects M.2 NVMe SSDs via Oculink SFF-8611/8612 or M.2 SATA SSDs via 22-pin SATA, replacing a 2.5-inch drive

  • Connect NVMe M-key SSDs via Oculink SFF-8611/8612 for PCIe 3.0 x4 performance
  • Use SATA M.2 drives through 22-pin SATA to replace 2.5 inch HDDs
  • Supports M.2 2230, 2242, 2260, 2280 modules with B or B+M key
  • Dual-mode adapter handles NVMe-to-Oculink and SATA-to-SATA conversions separately
  • Does not convert NVMe to SATA or SATA to Oculink, ensuring correct protocol matching

LORDWORLD Oculink SFF-8612 8611 U.2 Kit

This adapter kit connects an M.2 NVME SSD to an Oculink SFF-8611 or SFF-8612 port or an M.2 SATA SSD to a SATA 22-pin header. It supports M.2 2230, 2242, 2260 and 2280 form factors and fits a 2.5 inch drive bay. The card operates on a PCIe 3.0 x4 link and does not support SAS or Slimeline SAS HD interfaces.

Who this suits and who should look elsewhere

Builders adding NVME storage via an Oculink port or SATA storage via a standard SATA header will find both paths on one board. It does not convert NVME to SATA or NGFF SATA to Oculink. Buyers needing NVME-to-SATA translation or SAS connectivity must choose a different controller.

What to check before ordering

Confirm your motherboard or backplane provides an Oculink SFF-8611 or SFF-8612 connector for the NVME path and a SATA 22-pin port for the SATA path. Verify the M.2 SSD is key M for NVME or key B or B+M for SATA and matches the 2230, 2242, 2260 or 2280 length. Ensure the chassis has a 2.5 inch bay for the converter.

Highlights

  • Connect NVMe M-key SSDs via Oculink SFF-8611/8612 for PCIe 3.0 x4 performance
  • Use SATA M.2 drives through 22-pin SATA to replace 2.5 inch HDDs
  • Supports M.2 2230, 2242, 2260, 2280 modules with B or B+M key
  • Dual-mode adapter handles NVMe-to-Oculink and SATA-to-SATA conversions separately
  • Does not convert NVMe to SATA or SATA to Oculink, ensuring correct protocol matching

Specifications

BrandLORDWORLD

Questions about this item

Which motherboard interface is required to run an NVME M-key SSD through this adapter?

The motherboard must provide an Oculink SFF-8611 or SFF-8612 port for the NVME M-key SSD to operate at PCIe 3.0 x4.

Can I keep my existing 2.5 inch SATA drive cage when adding an NGFF B-key SATA SSD with this kit?

Yes, the adapter presents a standard SATA 22-pin interface so the NGFF B-key SSD fits into the same 2.5 inch bay as the older drive.

How do I confirm the NVME M-key SSD is communicating over the Oculink link after installation?

The drive should appear in the BIOS or OS device manager as a PCIe 3.0 x4 NVME device and show expected read and write speeds for that link width.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.