We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green PCBs linked by a flat 30cm cable with a 90 degree M-key connector

LORDWORLD

LORDWORLD NVME SATA Extender Card 30cm 90 Degree M-Key 2230-22110

SKU CH-RT82-Z34AQ

Extends NVME or SATA M.2 drives up to 22110 size via a 30 cm flexible cable with a 90-degree M-key connector, supporting NVME 1.4 at 64 Gbps and SATA at 6 Gbps

  • Extends NVME or SATA drives up to 64Gbps via PCI-E 4.0
  • 90-degree M-key plug fits tight spaces around the motherboard socket
  • 30cm flexible cable routes NVME 2230-22110 or SATA drives away from crowded slots
  • Two PCBA boards included for direct NVME-to-NVME or SATA-to-SATA extension only
  • Supports NVME 1.4 and SATA protocols without signal conversion between them

Extender Card for Tight M-Key Slots

This LORDWORLD extender card moves an M-key NVMe or SATA drive up to 30 cm away from the motherboard socket. The 90-degree angled plug fits into crowded layouts where a straight connector would hit other components. It supports drive lengths from 2230 through 22110, so most common M.2 form factors can be repositioned without changing the drive itself.

Signal Quality Over a 30 cm Flex Cable

The flexible PCIe 4.0 cable carries NVMe 1.4 traffic at up to 64 Gbps and NGFF SATA traffic at up to 6 Gbps. Because the extender is purely passive, it adds no active circuitry that would draw extra power or generate heat. The short 30 cm length keeps signal loss low, preserving the drive's rated throughput in normal desktop workloads.

Installation Requirements and Clearance Gains

One PCBA plugs into the motherboard M-key slot, the second PCBA accepts the drive, and the cable bridges them. The assembly only passes through NVMe-to-NVMe or SATA-to-SATA signals; it cannot cross-convert between the two protocols. By relocating the drive, the card frees space around the original socket for larger coolers or additional expansion cards.

Highlights

  • Extends NVME or SATA drives up to 64Gbps via PCI-E 4.0
  • 90-degree M-key plug fits tight spaces around the motherboard socket
  • 30cm flexible cable routes NVME 2230-22110 or SATA drives away from crowded slots
  • Two PCBA boards included for direct NVME-to-NVME or SATA-to-SATA extension only
  • Supports NVME 1.4 and SATA protocols without signal conversion between them

Specifications

BrandLORDWORLD

Questions about this item

How do I install the 90-degree M-key extender so the 30 cm cable clears nearby components?

Plug the angled M-key board into the motherboard M.2 slot, secure the target SSD on the second board, then route the 30 cm flexible cable without sharp bends; the 90-degree connector keeps the assembly low-profile in tight cases.

What upkeep does the flexible riser cable need over time?

Inspect the 30 cm cable periodically for kinks or connector dust; reseat both M-key boards if contact oxidises, otherwise no scheduled maintenance is required.

At what sustained throughput does the PCIe 4.0 link saturate with an NVMe 1.4 drive?

The extender passes up to 64 Gbps, so an NVMe 1.4 SSD will hit the link ceiling before the cable becomes the bottleneck.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.