LORDWORLD
LORDWORLD NEMA L5-15R Twist Lock Female Receptacle 15A 125V Yellow
A twist-lock female receptacle rated 15A 125V with ETL/cETL approval for secure generator and industrial power connections
- Twist-lock mechanism prevents accidental disconnection on generators and industrial cords
- ETL and cETL listed to UL498 and CSA C22.2#42 for 15A 125V service
- UL94-V0 nylon shell with solid copper contacts resists flame and ensures conductivity
- Built-in dust shield protects internal terminals from dirt and debris
- Rewireable screw-terminal housing accepts 12, 14 or 16AWG three-wire cables for quick cord-end replacement
Industrial Twist-Lock Receptacle
This LORDWORLD NEMA L5-15R female receptacle provides a secure twist-lock connection for 15A 125V circuits. It is designed for generators, outdoor equipment and industrial power cords where accidental pull-out must be prevented. The yellow nylon housing meets UL94-V0 flame-retardant standards and includes a built-in dust shield to protect internal terminals from dirt. ETL and cETL listings confirm compliance with UL498 and CSA C22.2#42 for commercial and industrial use.
Thermals Noise and Power Draw
The receptacle handles continuous 15A at 125V with solid copper contacts for high conductivity and minimal resistive heating under normal load. No moving parts or active cooling mean silent operation and zero standby power draw. The UL94-V0 rated nylon shell resists heat and flame during sustained use. Wiring terminals accept 12, 14 or 16AWG conductors for proper current capacity.
Rewireable Screw-Terminal Installation
A split housing with screw terminals allows straightforward field replacement of damaged cord ends on SJT, SVT, STO or SJTW three-wire cables. Terminals are clearly marked to ensure accurate wiring for safety and code compliance. This design suits installers who need a durable, serviceable connector without specialised tools. Buyers requiring a non-rewireable moulded plug or a different NEMA configuration will need another product.
Highlights
- Twist-lock mechanism prevents accidental disconnection on generators and industrial cords
- ETL and cETL listed to UL498 and CSA C22.2#42 for 15A 125V service
- UL94-V0 nylon shell with solid copper contacts resists flame and ensures conductivity
- Built-in dust shield protects internal terminals from dirt and debris
- Rewireable screw-terminal housing accepts 12, 14 or 16AWG three-wire cables for quick cord-end replacement
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
How do I wire the LORDWORLD L5-15R twist-lock receptacle to a 12 AWG cord and which step do people often miss?
Strip the 12/14/16AWG cable, match each conductor to the clearly marked screw terminals inside the split housing, tighten every screw fully, then snap the housing halves together — the step most often missed is re-seating the inner dust shield so it blocks dirt from the terminals.
What part of this receptacle will need replacement first after repeated generator use?
The copper contacts and screw terminals carry the full 15 A 125 V load; they wear from insertion cycles and thermal cycling long before the UL94-V0 nylon shell or dust shield degrade.
At what sustained load does the twist-lock mechanism or terminals hit their thermal limit?
The ETL/cETL listing to UL498 and CSA C22.2 #42 certifies continuous operation at the rated 15 A 125 V; exceeding that current is the first limit that appears under sustained use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



