We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flanged inlet with hinged waterproof cover, four-pin twist-lock face

LORDWORLD

LORDWORLD Nema L14-30P Flanged Inlet Waterproof Cover 30AMP 125/250V Black

SKU CH-G69Z-X312F

ETL-verified 30 A 125/250 V locking inlet with waterproof cover for generator transfer-switch connections

  • ETL verified for safe power connections
  • Waterproof cover protects the inlet from moisture
  • Locking 3 pole 4 wire design ensures secure fit
  • Compatible with 10 8 6 AWG 4 conductor cords
  • Simple installation for generator or transfer switch setups

Product identity

The LORDWORLD Nema L14-30P flanged inlet provides a 30AMP 125/250V locking connection for generator or transfer-switch installations. It suits electricians and DIY installers who need a code-compliant power entry point rated for four-wire cords.

Thermals noise and power

The ETL-verified inlet handles continuous 30AMP loads at 125/250V without active cooling, so it runs silently and adds no measurable heat to the enclosure. Power draw is determined entirely by the connected load rather than the inlet itself.

Accessory impact

The integrated waterproof cover seals the face when the plug is removed, protecting the contacts from moisture and debris in outdoor or garage environments. The flanged mounting ears and lock-in 14-30P geometry simplify panel installation and ensure a secure mating with compatible 10AWG to 6AWG four-conductor cords.

Highlights

  • ETL verified for safe power connections
  • Waterproof cover protects the inlet from moisture
  • Locking 3 pole 4 wire design ensures secure fit
  • Compatible with 10 8 6 AWG 4 conductor cords
  • Simple installation for generator or transfer switch setups

Specifications

BrandLORDWORLD

Questions about this item

How do I mount the L14-30P flanged inlet and what wiring step is often missed?

Mount the flanged body through a panel cut-out and secure with the supplied screws. The step often missed is tightening each of the four terminals — two hots, neutral and ground — onto 10, 8 or 6 AWG conductors so no strand escapes the clamp.

What part of the inlet will need replacement first in outdoor use?

The waterproof cover hinge and gasket degrade from UV and temperature cycles; inspect them yearly and replace the cover assembly when the seal no longer snaps shut tightly.

At what sustained load does the inlet hit its thermal limit?

The ETL-verified rating is 30 A at 125/250 V; continuous operation at or above 30 A will cause the terminals to reach their temperature limit first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.