LORDWORLD
LORDWORLD NEMA L14-20P Flanged Outlet Waterproof Cover 20A 125/250V Black
A UL-verified 20 A locking receptacle with a weatherproof cover for 125/250 V generator or transfer-switch connections
- UL verified for safe power delivery
- Waterproof cover protects outdoor connections
- Locking 3 pole 4 wire design ensures secure fit
- Accepts 10 8 6 AWG 4 conductor cords
- Simple install for generator or transfer switch use
NEMA L14-20P flanged outlet
This NEMA L14-20P flanged outlet provides a 20 amp 125/250 volt male receptacle with three poles and four wires. It is UL verified and accepts 10, 8 or 6 AWG four conductor cords such as ST STOW STO SJTW types. The built in waterproof cover protects the connection in damp or outdoor locations. Installers needing a locking inlet for generator or transfer switch wiring will find it suitable.
Sustained load behaviour
The outlet is rated for a continuous 20 amp current at 125/250 volts so it maintains power delivery without derating during extended generator runs. The locking 14-20P design keeps the plug secure under vibration or cable tension so the circuit stays closed over long periods. Copper contacts and the four wire configuration support balanced loads across both voltage legs. No thermal trip or automatic shutdown is mentioned in the data.
Thermals noise and power
As a passive wiring device it produces no audible noise and draws no power of its own. The housing and cover remain at ambient temperature during normal operation because only the connected conductors carry current. The waterproof cover seals the face when not in use preventing moisture ingress that could cause corrosion or heating at the terminals. No active cooling or fan is present.
Highlights
- UL verified for safe power delivery
- Waterproof cover protects outdoor connections
- Locking 3 pole 4 wire design ensures secure fit
- Accepts 10 8 6 AWG 4 conductor cords
- Simple install for generator or transfer switch use
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
How much heat or power does the L14-20P outlet generate when running at 20 amps continuously?
The outlet itself is a passive connector and does not generate heat or consume power; any warmth comes from the 10 AWG to 6 AWG cord carrying the 20 A load at 125/250 V.
What cord and wiring must I already have to install this flanged outlet?
You need a 4-conductor cord rated ST, STOW, STO or SJTW in 10 AWG, 8 AWG or 6 AWG to match the 20 A, 125/250 V rating.
Will this L14-20P outlet mate with my older L14-20 generator inlet and transfer switch?
Yes, the NEMA L14-20P locking male receptacle is the standard 3-pole, 4-wire 20 A 125/250 V interface used on matching generator inlets and transfer switches.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



