We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black NEMA 6-30R female connector with nylon shell and three brass terminals

LORDWORLD

LORDWORLD NEMA 6-30R Female Connector 30A 250V Black

SKU CH-0ME7-DHGHB

ETL-certified NEMA 6-30R female receptacle rated 30 A at 250 V accepts 6–12 AWG cord and includes two strain-relief fittings

  • ETL certified for safety compliance with UL 498 and CSA C22.2#42 standards
  • Handles 30 amps at 250 volts for heavy-duty welding and dryer applications
  • Accepts 12 to 6 AWG cords at 30 amps and 11 to 12 AWG at 25 amps
  • Flame-retardant nylon shell rated UL 94-V0 with RoHS and REACH compliance
  • Includes two strain reliefs for secure cord grip up to 31.5 mm diameter

NEMA 6-30R Female Connector

The LORDWORLD NEMA 6-30R is a 30-amp, 250-volt female receptacle built for welders, dryers and similar high-draw equipment. It accepts 12 AWG to 6 AWG three-conductor cords and carries ETL certification to UL 498 and CSA C22.2 No. 42 standards. The connector is supplied new in black.

Heavy-Duty Build and Wiring

The housing uses UL 94-V0 rated nylon that meets RoHS and REACH requirements, while the contacts are pure copper for reliable conductivity. Terminals are clearly marked X, Y, Z for line conductors and G for grounding, simplifying correct installation. Two strain-relief fittings are included to secure cable outer diameters up to 31.5 mm.

Replacing Worn or Uncertified Ends

This receptacle replaces damaged or non-certified cord ends on existing 30 A 250 V leads, restoring a safe, code-compliant connection. The jump is worthwhile when the original plug shows heat damage, loose terminals or lacks the required certification markings. It is not suited for circuits rated above 30 A or for cord gauges outside the 12–6 AWG range.

Highlights

  • ETL certified for safety compliance with UL 498 and CSA C22.2#42 standards
  • Handles 30 amps at 250 volts for heavy-duty welding and dryer applications
  • Accepts 12 to 6 AWG cords at 30 amps and 11 to 12 AWG at 25 amps
  • Flame-retardant nylon shell rated UL 94-V0 with RoHS and REACH compliance
  • Includes two strain reliefs for secure cord grip up to 31.5 mm diameter

Specifications

BrandLORDWORLD

Questions about this item

What does the NEMA 6-30R 30 A 250 V rating cap in practice?

The connector is rated for 30 A at 250 V with cords from 6 to 10 AWG and 25 A at 250 V with 11 to 12 AWG cords, matching the UL 498 and CSA C22.2 No. 42 standards.

What cord diameters and wire gauges will physically fit this receptacle?

It accepts 12 to 6 AWG three-conductor cords such as SJT, SJTW, ST, STW, SO and similar types, with a maximum outer diameter of 31.5 mm (1.24 in).

How is the connector wired and which step is often missed?

Terminals are marked X, Y, Z for line conductors, W for grounded neutral and G for grounding; the strain-relief clamps supplied must be tightened to secure the cord before use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.