We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow NEMA 6-30R female connector with nylon shell and three terminals

LORDWORLD

LORDWORLD NEMA 6-30R 30A 250V Female Connector Yellow

SKU CH-YFPS-7HSNV

ETL-certified NEMA 6-30R female receptacle rated 30 A at 250 V for welders and dryers

  • ETL certified for safe 30 A 250 V welding connections
  • Accepts 12–6 AWG cords at 30 A and 11–12 AWG at 25 A
  • UL 94-V0 nylon shell resists flame and meets RoHS/REACH
  • Pure copper pins with X Y Z and G terminal markings ensure correct wiring
  • Two extra strain reliefs included for secure cord fit up to 31.5 mm OD

NEMA 6-30R 30A 250V Connector

This ETL-certified female receptacle handles 30 amps at 250 volts. It is built for heavy-duty equipment such as welders and dryers. The yellow nylon housing meets UL 94-V0 flammability requirements and complies with ROHS and REACH directives. Terminals are clearly marked X, Y, Z and G for correct wiring.

Cord compatibility and build integration

The connector accepts cords from 6 AWG through 12 AWG, rated at 30 A for 6–10 AWG and 25 A for 11–12 AWG. Supported cable types include SJT, SJTW, ST, STW, SO and many related service cords. Two extra strain-relief fittings are supplied to secure the cable jacket up to 31.5 mm outer diameter. No locking mechanism is described beyond standard turn-and-pull action.

Thermal and power characteristics

The pure copper contacts and nylon shell are rated for continuous 30 A / 250 Vac operation under UL 498 and CSA C22.2 No. 42 standards. No active cooling or fan is present; heat dissipation relies on the conductor cross-section and the connector’s free-air mounting. Normal use produces no audible noise and draws only the load current of the attached appliance.

Highlights

  • ETL certified for safe 30 A 250 V welding connections
  • Accepts 12–6 AWG cords at 30 A and 11–12 AWG at 25 A
  • UL 94-V0 nylon shell resists flame and meets RoHS/REACH
  • Pure copper pins with X Y Z and G terminal markings ensure correct wiring
  • Two extra strain reliefs included for secure cord fit up to 31.5 mm OD

Specifications

BrandLORDWORLD

Questions about this item

What cord gauges does the 30 A rating cover?

The receptacle is rated 30 A at 250 V for 6 to 10 AWG cord and 25 A at 250 V for 11 to 12 AWG cord.

How hot can the nylon housing get before it degrades?

The housing uses Nylon UL 94-V0 material, which meets a vertical burn test and complies with RoHS and REACH.

What cable diameter will the strain reliefs accept?

The strain reliefs support a maximum cord outer diameter of 31.5 mm (1.24 inches).

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.