LORDWORLD
LORDWORLD NEMA 5-15P to L14-30R Adapter Cord 1Foot
Connects a standard 15A household plug to a 30A generator locking receptacle using heavy-duty 12AWG cable
- Connects a 15A household plug to a 30A generator inlet
- Handles 125V power with 12AWG four-conductor STW cable
- Locking L14-30R female end secures the generator connection
- Compact 1-foot length keeps the setup tidy at 32CM
- Heavy-duty yellow cord and black fittings built for outdoor use
Connection Type
This adapter cord connects a standard NEMA 5-15P household plug to a NEMA L14-30R generator locking receptacle. It enables equipment with a 30A generator inlet to draw power from a 15A 125V wall outlet. The 12AWG STW cable uses four conductors for heavy-duty use. The cord measures 32CM in length.
Upgrade Context
It replaces makeshift jumper cables when connecting portable generators or transfer switches to household circuits. The jump is worth it when a secure locking connection is required for safety and code compliance. The 15A plug rating limits total draw to household circuit capacity. Users needing continuous 30A loads cannot use this adapter.
Installation Notes
Plug the 5-15P male end into a wall outlet and twist the L14-30R female end onto the generator inlet until it locks. The short 1Foot length reduces tripping hazards but offers no slack for distant outlets. The yellow STW jacket resists oil and weather for outdoor generator use. Ensure the household circuit breaker can handle the connected load.
Highlights
- Connects a 15A household plug to a 30A generator inlet
- Handles 125V power with 12AWG four-conductor STW cable
- Locking L14-30R female end secures the generator connection
- Compact 1-foot length keeps the setup tidy at 32CM
- Heavy-duty yellow cord and black fittings built for outdoor use
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
Will the L14-30R locking receptacle accept my generator's twist-lock plug?
Yes, the female end is a NEMA L14-30R twist-lock receptacle designed to mate with a standard L14-30P generator plug.
How do I connect this adapter between a wall outlet and my generator inlet box?
Insert the 5-15P male plug into a 125 V household receptacle, then align and twist the generator's L14-30P plug into the L14-30R female end until it locks.
The cord uses 12 AWG conductors — will that handle continuous load from a 15 A circuit?
The STW 12 AWG four-conductor cable is rated for the 15 A plug side; the 30 A receptacle rating only indicates the locking configuration, not a higher continuous current capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



