We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow NEMA 14-30R female connector with nylon shell and three terminals

LORDWORLD

LORDWORLD NEMA 14-30R Female Connector 30A 125/250V Yellow

SKU CH-1TM7-09PV6

ETL-certified NEMA 14-30R female receptacle rated 30A 125/250V with nylon UL 94-V0 housing and two strain reliefs included

  • ETL certified for safe 30A 125/250V dryer connections
  • Accepts 12–6 AWG cords for flexible installation
  • UL 94-V0 nylon shell resists heat and flame
  • Pure copper terminals ensure reliable conductivity
  • Two strain reliefs included for secure cord grip

ETL-Certified Dryer Receptacle

This NEMA 14-30R female connector provides a 30-amp, 125/250-volt receptacle for electric dryer installations. The ETL listing confirms compliance with UL 498 and CSA C22.2 No. 42 safety standards. A nylon shell rated UL 94-V0 and pure copper terminals ensure durable, code-compliant connections.

Replacing Worn or Unrated Cord Ends

The connector replaces damaged or non-certified dryer plugs on existing appliance cords. An upgrade is worth it when the old plug shows heat damage, loose terminals, or lacks third-party safety certification. It accepts 6 AWG through 12 AWG three-conductor cords such as SJT, ST, and SO types for a secure, heavy-duty repair.

Verify Cord Gauce and Outer Diameter Before Ordering

Confirm your dryer cord uses three conductors between 6 AWG and 12 AWG and that the outer jacket diameter does not exceed 31.5 millimetres (1.24 inches). The terminals are marked X, Y, Z for line connections and G and W for grounding and neutral respectively. Two strain-relief inserts are included to match the cord jacket securely.

Highlights

  • ETL certified for safe 30A 125/250V dryer connections
  • Accepts 12–6 AWG cords for flexible installation
  • UL 94-V0 nylon shell resists heat and flame
  • Pure copper terminals ensure reliable conductivity
  • Two strain reliefs included for secure cord grip

Specifications

BrandLORDWORLD

Questions about this item

What cord diameters fit the 31.5 mm strain relief opening on this NEMA 14-30R connector?

The strain relief accepts cords up to 31.5 mm (1.24 inches) outer diameter, covering 12–6 AWG three-conductor types such as SJT, ST, STO, SO, SRD and SVO.

Which terminal markings on the NEMA 14-30R body show where to land the hot, neutral and ground conductors?

Line terminals are marked X, Y and Z; the grounding terminal is marked G; the grounded (neutral) terminal is marked W — match each conductor to its letter before tightening.

How often should the nylon UL 94-V0 housing and copper-alloy pins be inspected on a dryer receptacle seeing 30 A at 125/250 V?

Check the housing for cracks and the pins for discoloration or looseness at least once a year, or whenever the cord is removed, to catch heat damage early.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.