LORDWORLD
LORDWORLD NEMA 14-30R 30A 125/250V Female Connector Black
ETL-certified NEMA 14-30R female receptacle rated 30A 125/250V for dryer cords 6–12 AWG
- ETL certified for safety compliance
- 30 amp 125/250 volt rating supports heavy-dryer loads
- Accepts 12 to 6 AWG cords for flexible wiring
- Nylon UL 94-V0 shell resists heat and flame
- Two strain reliefs included for secure cord grip
NEMA 14-30R 30A Connector
This ETL-certified NEMA 14-30R female receptacle accepts 30 amps at 125/250 volts for dryer and heavy-duty appliance connections. The black nylon housing meets UL 94-V0 flammability requirements and complies with RoHS and REACH substance restrictions. Terminal markings X, Y, Z, G and W follow UL 498 and CSA C22.2 No. 42 standards for clear wiring identification. Two strain-relief fittings are included to secure the cord entry.
12-6 AWG Cord Capacity
The connector accommodates 12 to 6 AWG three-conductor cords including SJT, SJTW, ST, STW, SO and SVO types with a maximum outer diameter of 31.5 mm. At 125/250 volts the rating holds at 30 amps for 6-10 AWG conductors and drops to 25 amps at 250 volts for 11-12 AWG conductors. Pure copper terminals provide low-resistance contact across the supported wire range. Builders needing larger gauge wire or higher ampacity must select a different device.
Replaces Worn Dryer Plugs
This receptacle directly replaces damaged or outdated NEMA 14-30R dryer outlets and cord-end sockets in existing installations. The upgrade is worthwhile when the original housing is cracked, terminals are corroded or the strain relief no longer grips the cable sheath. It is not suited for NEMA 14-50 or other pin configurations, nor for circuits requiring GFCI protection integrated into the receptacle.
Highlights
- ETL certified for safety compliance
- 30 amp 125/250 volt rating supports heavy-dryer loads
- Accepts 12 to 6 AWG cords for flexible wiring
- Nylon UL 94-V0 shell resists heat and flame
- Two strain reliefs included for secure cord grip
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
Will the LORDWORLD NEMA 14-30R connector accept the 10 AWG cord I already use for my dryer?
Yes, the receptacle is rated for 30 A at 125/250 Vac with 6 through 10 AWG cord, so a 10 AWG cable fits the terminal range.
How can I confirm the terminals are wired correctly after installation?
The line terminals are marked X, Y and Z, the grounding terminal is marked G and the grounded terminal is marked W for clear identification.
Does the package include strain reliefs or must I buy them separately?
Two extra strain reliefs are supplied in the box, so no separate purchase is needed for cord securing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



