We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow NEMA 10-50R 50A female connector with three-prong socket and nylon shell

LORDWORLD

LORDWORLD NEMA 10-50R 50A 125/250V Female Connector Yellow

SKU CH-BP3R-R7FWQ

ETL-certified NEMA 10-50R female connector rated 50 amps at 125/250 volts, accepts 12 to 6 AWG cord and includes extra strain reliefs

  • ETL certified for safety compliance
  • 50 amp rating supports heavy-dryer loads
  • Accepts cords from 12 to 6 AWG
  • Nylon UL 94-V0 shell resists heat
  • Terminal markings X, Y, Z, G, W simplify wiring

NEMA 10-50R 50 A female connector

The LORDWORLD NEMA 10-50R is a 50 A, 125/250 V female receptacle built for heavy-duty dryer and range cords. It accepts 12-6 AWG three-conductor cables and includes two extra strain reliefs for a secure fit. The ETL certified design meets UL 498 and CSA C22.2 No. 42 safety standards.

Thermals and power handling

Rated for 50 A at 125/250 Vac with 6 AWG cord, 40 A with 7/8 AWG, 30 A with 9/10 AWG and 25 A with 11/12 AWG. The nylon UL 94-V0 shell and pure copper pins handle continuous loads without overheating. No active cooling is required for normal operation.

Cord compatibility decides fit

The connector supports a maximum cable outer diameter of 31.5 mm (1.24 inches) and works with SJT, ST, SO, SVO and similar jacket types from 12 AWG to 6 AWG. Builders using larger-diameter or smaller-gauge cords cannot use this receptacle.

Highlights

  • ETL certified for safety compliance
  • 50 amp rating supports heavy-dryer loads
  • Accepts cords from 12 to 6 AWG
  • Nylon UL 94-V0 shell resists heat
  • Terminal markings X, Y, Z, G, W simplify wiring

Specifications

BrandLORDWORLD

Questions about this item

How do I wire the NEMA 10-50R female connector and which terminal marking trips people up?

Connect the two hot wires to terminals marked X and Y, the neutral to W, and the ground to G; the step most often missed is landing the neutral on W instead of a ground screw.

What cord gauges and jacket types does this 50 A receptacle accept for long-term use?

It accepts 6 AWG through 12 AWG three-conductor cords with SJT, SJTW, ST, STW, STO, STOW, SJO, SJOW, SO, SRD, SVO and similar jackets up to 31.5 mm outside diameter.

At what sustained current does the NEMA 10-50R rating drop below 50 A because of conductor heating?

The 50 A rating holds only with 6 AWG cord; with 7/8 AWG it drops to 40 A, with 9/10 AWG to 30 A, and with 11/12 AWG to 25 A at 125/250 Vac.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.