LORDWORLD
LORDWORLD NEMA 10-30R 30A 125/250V Female Receptacle Black
ETL-certified NEMA 10-30R female receptacle rated 30 A at 125/250 V for dryer cords from 6 to 12 AWG
- ETL certified for safe dryer connections
- Accepts 12 to 6 AWG cords for flexible wiring
- Nylon UL 94-V0 shell resists heat and flame
- Pure copper pins ensure reliable conductivity
- Two extra strain reliefs included for secure fit
30-Amp Dryer Receptacle
This NEMA 10-30R female receptacle delivers 30 amps at 125/250 volts for dryer and range connections. ETL certification confirms compliance with UL 498 and CSA C22.2 #42 standards. The nylon shell meets UL 94-V0 flammability rating and RoHS/REACH requirements. Two strain reliefs are included for secure cord attachment.
Installers Replacing Three-Prong Outlets
Electricians and DIYers replacing existing three-wire dryer outlets will find the marked X, Y, Z and G terminals familiar. The device accepts 12-6 AWG cords across common SJT, ST, SO and SVO types. Builders working on new installations that require a four-wire grounding scheme cannot use this receptacle.
NEMA 10-30R Configuration
The three-prong 10-30R pattern is the single specification that determines fit; it mates only with matching NEMA 10-30P plugs. Maximum cord outer diameter is 31.5 mm. No other NEMA configuration will connect to this socket.
Highlights
- ETL certified for safe dryer connections
- Accepts 12 to 6 AWG cords for flexible wiring
- Nylon UL 94-V0 shell resists heat and flame
- Pure copper pins ensure reliable conductivity
- Two extra strain reliefs included for secure fit
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What cord gauges and types can I connect to the NEMA 10-30R receptacle?
The receptacle accepts 6 to 12 AWG cords rated SJT, SJTW, ST, STW, SO, SJO, SJOO, SJOW, SJOOW and similar 3-conductor types up to 31.5 mm outer diameter.
Will the terminal markings on this socket match the wiring on my existing dryer cord?
Line terminals are marked X, Y, Z; the grounding terminal is marked G and the grounded terminal W, matching standard NEMA 10-30 wiring conventions.
How can I verify the receptacle is correctly seated and rated after installation?
The ETL mark on the body confirms compliance with UL 498 and CSA C22.2#42, and the nylon shell carries a UL 94-V0 flammability rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



