We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow NEMA 10-30R female connector with three-prong nylon shell and strain reliefs

LORDWORLD

LORDWORLD NEMA 10-30R 30A 125/250V Female Connector Yellow

SKU CH-PECA-JCQ2F

ETL-certified NEMA 10-30R female connector rated 30A at 125/250V, accepts 6–12 AWG cord and includes two strain reliefs

  • ETL certified for safety compliance
  • Accepts 12 to 6 AWG cords for flexible wiring
  • Rated 30 amps at 125/250 volts for dryer power
  • Flame-retardant nylon shell meets UL 94-V0 standard
  • Includes two strain reliefs for secure cord attachment

NEMA 10-30R Female Connector

This ETL certified receptacle provides a 30-amp 125/250-volt connection for electric dryers and similar heavy-duty appliances. The yellow nylon shell meets UL 94-V0 flammability requirements and complies with RoHS and REACH standards. Pure copper terminals ensure reliable conductivity for the rated load.

Sustained Load Behaviour

The connector carries 30 amps at 125/250 volts AC with wire gauges from 6 to 10 AWG and 25 amps at 250 volts AC with 11 or 12 AWG cord. Terminals are marked X, Y, Z for line connections and G and W for grounding and grounded conductors. The design supports continuous operation at these ratings without derating.

Cord Compatibility Limits

Acceptable cord outside diameter reaches a maximum of 31.5 millimetres or 1.24 inches for types including SJT, ST, STW, STOW, SO and SVO. Two additional strain reliefs are supplied to secure cords ranging from 12 to 6 AWG with three conductors. Compliance follows UL 498 2017 edition and CSA C22.2 number 42 2010 edition.

Highlights

  • ETL certified for safety compliance
  • Accepts 12 to 6 AWG cords for flexible wiring
  • Rated 30 amps at 125/250 volts for dryer power
  • Flame-retardant nylon shell meets UL 94-V0 standard
  • Includes two strain reliefs for secure cord attachment

Specifications

BrandLORDWORLD

Questions about this item

Does the NEMA 10-30R connector generate noticeable heat when supplying 30 A continuously?

The receptacle is rated for 30 A at 125/250 Vac with ETL certification to UL 498 and CSA C22.2 No. 42, and its pure-copper pins with a nylon UL 94-V0 shell are designed to handle the rated current without excessive temperature rise.

What wire gauges and cord types must I already have to wire this female connector?

It accepts 6–10 AWG cord at 30 A 125/250 Vac and 11–12 AWG at 25 A 250 Vac, compatible with SJT, SJTW, ST, STW, SO, SVO and similar 3-conductor cords up to 31.5 mm outer diameter.

Will the X, Y, Z and G terminal markings on this socket match the wiring on my existing dryer cord?

Yes — the line terminals are marked X, Y, Z and the grounding terminal G, following the UL 498 standard used on NEMA 10-30 dryer cords, so a correctly wired legacy cord will connect directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.