We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Y-splitter cable with 10-30P male plug to 10-30R and 14-30R female connectors, 1.0m total length

LORDWORLD

LORDWORLD NEMA 10-30P to 10-30R & 14-30R Y Splitter 1.0m

SKU CH-W453-KMZZH

Splits one NEMA 10-30P dryer outlet into 10-30R and 14-30R sockets, 1.0 m total length, 10 AWG copper cable rated for 7500 W at 250 V

  • Powers two dryers from one outlet using a 30-AMP Y splitter
  • 0 metre total cable with strain relief at the .5 metre midpoint
  • 10-AWG STW cord with 100% copper wire rated for 7500 watts
  • Accepts both 10-30R and 14-30R dryer plugs on the female ends
  • Tested to 100% safety and durability standards for reliable operation

Splitter for two dryer outlets

The LORDWORLD adapter splits a single NEMA 10-30P 30-amp 250-volt male plug into one NEMA 10-30R and one NEMA 14-30R female receptacle. It lets two dryer-class devices share one wall outlet. The Y-shaped cord measures 1.0 metre total, with 0.5 metre from the plug to the strain relief and 0.5 metre from there to each female end.

30-amp 250-volt practical limit

The assembly uses 10-AWG STW outdoor-rated cable with 100-percent copper conductors and supports a maximum of 7500 watts. Combined draw of both connected appliances must stay within the 30-amp rating of the plug and the branch circuit. Exceeding that limit will trip the breaker or overheat the cord.

Replaces dual-outlet installs

This splitter replaces the cost and labour of adding a second dedicated 30-amp circuit when only one NEMA 10-30 receptacle exists. It is useful where laundry equipment and an EV charger or second dryer must run from the same feed. Not suited for installations that require simultaneous full-load operation beyond 7500 watts or where local code forbids sharing a single 30-amp branch.

Highlights

  • Powers two dryers from one outlet using a 30-AMP Y splitter
  • 0 metre total cable with strain relief at the .5 metre midpoint
  • 10-AWG STW cord with 100% copper wire rated for 7500 watts
  • Accepts both 10-30R and 14-30R dryer plugs on the female ends
  • Tested to 100% safety and durability standards for reliable operation

Specifications

BrandLORDWORLD

Questions about this item

Should I pick the 10-30R or 14-30R outlet for my dryer?

The splitter provides both a 10-30R and a 14-30R female receptacle, so you can connect either a 3-prong or 4-prong dryer cord without choosing between them.

What does the 7500-watt rating mean when both outlets are used?

The 7500-watt maximum applies to the total combined load; running both dryers simultaneously must not exceed 30 amps at 250 volts on the single 10-30P supply.

How does the 10-AWG STW cable affect the 30-amp rating?

The 10-AWG STW cord is rated for 30 amps, so the 1.0-metre splitter safely carries the full 30-amp 250-volt load without derating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.