We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A compact 9.5 mm caddy with 13-pin SATA connector and mSATA/NGFF B/M-key slots, black plastic finish

LORDWORLD

LORDWORLD MSATA NGFF B/M-Key SSD to 13Pin Slimline SATA Caddy 9.5mm

SKU CH-HM0Y-A0F4B

Adds a second drive via the 13-pin 9.5 mm optical bay using mSATA or NGFF B/M-key SSDs with a selector switch

  • Add a second drive without cables or drivers
  • Supports mSATA or NGFF B/M-key SSDs via switch
  • Fits 9.5 mm optical bay with 13-pin SATA connector
  • Enables dual-boot from the added SSD
  • Tool-free latch secures the drive in place

MSATA and NGFF B/M-Key adapter

This caddy converts a 9.5mm laptop optical bay into a second SATA drive slot. It accepts either an MSATA SSD or an NGFF B-key or B/M-key SSD, selected by a physical switch. Only one drive type operates at a time. The adapter targets laptop owners who want extra internal storage without external enclosures.

Passive operation and thermal profile

The unit draws power directly from the laptop's SATA connection and requires no separate cables or power supply. It adds no active cooling components, so thermal output matches the installed SSD. Noise remains unchanged because the caddy itself has no moving parts.

Fits 9.5mm optical bay with SATA

Installation uses the existing optical drive screw and latch mechanism. The caddy presents a standard 13-pin Slimline SATA interface to the host. It frees the primary drive bay for the OS while the second drive handles backups or a dual-boot system. M-key NGFF SSDs are not supported.

Highlights

  • Add a second drive without cables or drivers
  • Supports mSATA or NGFF B/M-key SSDs via switch
  • Fits 9.5 mm optical bay with 13-pin SATA connector
  • Enables dual-boot from the added SSD
  • Tool-free latch secures the drive in place

Specifications

BrandLORDWORLD

Questions about this item

How do I install the caddy into a 9.5mm laptop optical bay?

Remove the CD-ROM drive, insert the mSATA or NGFF B/M-key SSD at an angle until it locks, close the retaining latch, secure the screw, then slide the caddy into the bay until the 13-pin Slimline SATA connector seats fully.

Will I need to replace the mode-switch or latch mechanism over time?

The sliding switch that selects between mSATA and NGFF B/M-key modes and the retaining latch that snaps closed are mechanical parts; they may wear after repeated drive swaps and can be replaced if they become loose.

What is the throughput ceiling when the caddy runs continuously?

Sustained speed is limited by the Slimline SATA link and the laptop's optical-bay controller, so the bottleneck appears at the SATA interface rather than the SSD itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.