LORDWORLD
LORDWORLD LK-7431 NEMA L14-30R 30A 125/250V 3-Pole 4-Wire Receptacle
A 30-amp industrial locking receptacle rated for 125/250 volts with 10 AWG cable capacity
- UL CUL certified for safe industrial power connections
- Twist-lock NEMA L14-30R prevents accidental disconnection under load
- Dual 125/250 volt rating suits both single and split-phase supplies
- 100% pure copper terminals deliver low-resistance 30 amp conductivity
- Rewirable DIY design accepts up to 10 AWG cable for quick field installation
Industrial Locking Receptacle
The LORDWORLD LK-7431 is a NEMA L14-30R female receptacle rated for 30 amps at 125/250 volts AC. It provides a twist-lock connection for industrial and commercial equipment requiring a secure 3-pole, 4-wire grounding configuration. The UL and CUL certified housing uses non-slip nylon and PBT plastic with pure copper terminal blades. It supports rewirable installation for power cables up to 10 AWG.
30-Amp 125/250V Rating
The single specification that determines compatibility is the NEMA L14-30R standard delivering 30 amps across both 125 volt and 250 volt circuits at 60 hertz. This 3-pole, 4-wire grounding arrangement suits generators, transfer switches and heavy-duty machinery needing a locking plug. Builders needing a different amperage, voltage or pin configuration must select a matching NEMA designation.
Thermals And Power Draw
The pure copper terminals minimise resistive heating while the nylon and PBT housing resists heat deformation under continuous 30-amp loads. No active cooling is required because the device is a passive connector without electronics. Normal operation produces no audible noise. Power draw depends entirely on the connected load rather than the receptacle itself.
Highlights
- UL CUL certified for safe industrial power connections
- Twist-lock NEMA L14-30R prevents accidental disconnection under load
- Dual 125/250 volt rating suits both single and split-phase supplies
- 100% pure copper terminals deliver low-resistance 30 amp conductivity
- Rewirable DIY design accepts up to 10 AWG cable for quick field installation
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What does the 30A 125/250V rating mean for actual use?
The receptacle is rated for 30 amps at either 125 volts or 250 volts AC, 60 hertz, suitable for industrial and commercial equipment.
What does the NEMA L14-30R twist-lock interface do in practice?
The locking design prevents accidental disconnection under vibration or load, and the 3-pole 4-wire grounding configuration supports split-phase wiring.
What cable size and mounting does the LK-7431 require?
It accepts up to 10 AWG cable with a strain relief that fits a maximum 10 AWG outer diameter, and it is a rewirable panel-mount female connector.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



