LORDWORLD
LORDWORLD LK-2313F NEMA L7-15R 15A 277V Industrial Locking Receptacle
Industrial-grade locking receptacle rated 15 A at 277 V with UL and cUL certification
- UL and CUL certified for code-compliant installations
- Non-slip PBT housing with 100% copper terminals ensures secure connections
- Accepts up to AWG 14 cable for flexible wiring options
- 2-pole 3-wire grounding design provides safe 277 V operation
- Rewirable DIY construction allows quick field installation
Industrial 277 V locking receptacle
This LORDWORLD LK-2313F is a NEMA L7-15R female receptacle rated for 15 A at 277 V AC. It provides a 2-pole, 3-wire grounding connection for industrial and commercial equipment. The twist-lock design secures the plug against vibration or accidental disconnection. It is suited for installers wiring fixed machinery or temporary power distribution.
Thermals noise and power draw
The receptacle carries 15 A continuously at 60 Hz without active cooling. Its PBT housing and pure copper blades dissipate heat passively during normal operation. No fan or moving parts are present, so the device adds no audible noise to the installation. Power draw is determined entirely by the connected load.
AWG 14 maximum cable gauge
The terminals accept stranded or solid conductors up to AWG 14. Cables thicker than this cannot be terminated reliably in the supplied clamps. The rewirable DIY layout allows field installation with basic hand tools. UL and CUL certification confirms compliance for the stated rating.
Highlights
- UL and CUL certified for code-compliant installations
- Non-slip PBT housing with 100% copper terminals ensures secure connections
- Accepts up to AWG 14 cable for flexible wiring options
- 2-pole 3-wire grounding design provides safe 277 V operation
- Rewirable DIY construction allows quick field installation
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
How do I wire the LORDWORLD LK-2313F receptacle and which step is often missed?
Strip the cable to suit AWG 14 maximum, connect the three wires to the 2-pole 3-wire grounding terminals, then secure the non-slip PBT housing; the step often missed is tightening the terminal screws fully on the pure copper blades.
What maintenance or replacement will the LK-2313F need over time?
Inspect the locking mechanism and copper terminals periodically for wear or discoloration; replace the receptacle if the twist-lock action loosens or the blades show pitting from 277 V arcing.
What limit appears first when the LK-2313F runs continuously at full load?
The 15 A rating at 277 V AC 60 Hz is the limiting factor; sustained current above 15 A will cause heating in the copper terminals before any other parameter is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



