We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 60×60 mm black cooling fan with copper centre and three-pin plug

LORDWORLD

LORDWORLD KDE1206PTVX 60×60×25 mm 7600 RPM 40.0 CFM 3-pin fan

SKU CH-M769-J49HP

A 60 × 60 × 25 mm chassis fan delivering 40.0 CFM at 7600 RPM with a double ball bearing and standard 3-pin connector

  • High airflow at 40.0 CFM for effective cooling
  • 7600 RPM speed moves air quickly through tight spaces
  • Double ball bearing design extends operational lifespan
  • Copper heatsink material improves thermal transfer efficiency
  • Standard 3-pin connector fits common motherboard headers

Compact 60 mm chassis fan

The LORDWORLD KDE1206PTVX is a 60×60×25 mm axial fan built for tight chassis bays and small-form-factor power supplies. It spins at 7600 RPM and moves 40.0 CFM through a standard three-pin header. Copper heatsink material and a double ball bearing suit builds that demand long-term reliability in constrained spaces.

Sustained airflow at rated speed

At 7600 RPM the fan delivers a steady 40.0 CFM without relying on burst curves or variable-speed profiles. The double ball bearing maintains consistent rotational stability during continuous operation, avoiding the friction drift common in sleeve designs. Copper construction helps dissipate heat from the motor itself, supporting uninterrupted duty cycles in always-on systems.

Thermal and acoustic profile under load

Power draw is rated at 2.8 W on a 12 V supply, limiting thermal contribution to the chassis. The double ball bearing produces a predictable mechanical hum that remains stable over time rather than escalating as lubricant ages. With no PWM control on the three-pin connector, voltage regulation is the only way to trade airflow for lower noise when full speed is not required.

Highlights

  • High airflow at 40.0 CFM for effective cooling
  • 7600 RPM speed moves air quickly through tight spaces
  • Double ball bearing design extends operational lifespan
  • Copper heatsink material improves thermal transfer efficiency
  • Standard 3-pin connector fits common motherboard headers

Specifications

BrandLORDWORLD

Questions about this item

How much noise and heat does the 7600 RPM fan generate when running continuously?

At 7600 RPM it moves 40.0 CFM and draws 2.8 W, so expect a noticeable airflow whine and modest heat output typical of a 60 mm double-ball-bearing chassis fan.

What connector must my motherboard or controller provide for this fan to work?

It uses a mainboard-standard 3-pin connector, so a 3-pin fan header or a 4-pin header that accepts 3-pin plugs is required.

Will the 60×60×25 mm frame fit the mounting holes on my older 6025 chassis or power-supply bracket?

Yes, the 60 mm square by 25 mm thick dimensions match the legacy 6025 form factor, so it aligns with standard 60 mm mounting patterns.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.