We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black IEC 320 C14 to C13 90 degree up angled power adapter

LORDWORLD

LORDWORLD IEC 320 C14 to C13 90° UP Angled Power Adapter 10A 250V

SKU CH-FKP4-MPM6G

A 90° upward angled IEC 320 C14 to C13 adapter rated 10A 250V for tight spaces behind monitors, PDUs or printers

  • Fits tight spaces with 90° upward angled design
  • Handles 10A at 250V for reliable power delivery
  • Connects IEC 320 C14 to C13 for broad device compatibility
  • Suits PDU, UPS, server and peripheral equipment setups
  • Check cable exit direction before installation for proper fit

What this adapter does

This IEC 320 C14 to C13 adapter redirects the cable ninety degrees upward. It fits between a male C14 inlet and a female C13 connector on monitors, computers, PDU chassis, printers and similar equipment. The angled body lets you route power cords where a straight plug would hit a wall or rack rail.

Build and daily use

The moulded housing accepts ten amps at two hundred fifty volts, matching standard IEC 320 ratings. Its ninety-degree bend keeps the cable close to the chassis, reducing strain on the port and tidying cable runs in tight server cabinets or behind desks. No tools are needed; the connector seats with a firm push.

Check before ordering

Verify that your device presents a C14 male inlet and that the cable you attach ends in a C13 female plug. Confirm the upward angle matches the clearance above the port; a downward or side exit would need a different adapter. Ensure the ten-amp, two-hundred-fifty-volt rating covers the connected load.

Highlights

  • Fits tight spaces with 90° upward angled design
  • Handles 10A at 250V for reliable power delivery
  • Connects IEC 320 C14 to C13 for broad device compatibility
  • Suits PDU, UPS, server and peripheral equipment setups
  • Check cable exit direction before installation for proper fit

Specifications

BrandLORDWORLD

Questions about this item

What does the IEC 320 C14 to C13 connection handle in practice?

It carries up to 10 A at 250 V, matching the standard rating for typical monitor, PC and PDU power cords.

How much clearance does the 90° UP angled body need behind the device?

The right-angle moulding sits flush against the panel, so only the depth of the adapter itself is required — no straight-cable bend radius.

How do I fit the adapter without forcing the cable the wrong way?

Check the equipment's C14 inlet orientation first; plug the adapter's C14 male end in so the C13 female socket points upward, then insert the power cord.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.