We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 0.5m HDMI to Micro HDMI cable with 90° upward angled connector, thin black 4.0mm jacket, gold-plated plugs

LORDWORLD

LORDWORLD HDMI 2.1 Male to Micro Male 90° UP Angled 0.5m 48Gbps 8K@60Hz 4K@120Hz

SKU CH-DCEK-1VNRJ

A 0.5 m HDMI 2.1 cable with a 90° upward micro connector delivers 48 Gbps bandwidth for 8K at 60 Hz or 4K at 120 Hz in tight spaces

  • HDMI 2.1 bandwidth at 48Gbps enables 8K at 60Hz and 4K at 120Hz
  • 90-degree UP angled Micro HDMI connector routes cleanly in tight camera rigs and gimbals
  • 0mm ultra-thin cable bends easily for compact installations on stabilisers and desks
  • Gold-plated connectors with welded ends resist tugging and maintain signal integrity
  • Backwards compatible with HDMI 1.3, 1.4, 2.0, 2.1 for TVs, monitors and consoles

HDMI 2.1 Micro Cable for Compact Rigs

This 0.5 metre cable connects a standard HDMI source to a Micro HDMI port on cameras, gimbals or small monitors. The 90-degree upward angle keeps the connector clear of battery doors and mounting plates. Gold-plated contacts and a welded shell resist wear from frequent plugging in tight setups.

Ultra-Thin 4.0 mm Cable for Flexible Routing

At just 4.0 mm in diameter the cable bends easily around stabiliser arms without adding drag. Passive construction means no external power draw and no active electronics to generate heat. The 48 Gbps bandwidth handles 8K at 60 Hz or 4K at 120 Hz without signal degradation.

Replaces Bulky Straight Cables in Tight Builds

Swap out stiff, straight cables that foul gimbal motion or block accessory ports. The angled micro connector solves clearance issues on cages where a straight plug would hit the frame. Not suited for runs longer than 0.5 m or for full-size HDMI ports on both ends.

Highlights

  • HDMI 2.1 bandwidth at 48Gbps enables 8K at 60Hz and 4K at 120Hz
  • 90-degree UP angled Micro HDMI connector routes cleanly in tight camera rigs and gimbals
  • 0mm ultra-thin cable bends easily for compact installations on stabilisers and desks
  • Gold-plated connectors with welded ends resist tugging and maintain signal integrity
  • Backwards compatible with HDMI 1.3, 1.4, 2.0, 2.1 for TVs, monitors and consoles

Specifications

BrandLORDWORLD

Questions about this item

How do I connect the 90° UP angled Micro HDMI end to my camera without stressing the port?

Align the Micro HDMI plug so the cable exits upward from the port, then press straight in; forcing it at an angle bends the ultra-thin 4.0 mm cable and can damage the connector.

Will the gold-plated connectors need cleaning or replacement over time?

The gold plating resists oxidation, so no routine cleaning is required; only replace the cable if the welded connector housing cracks or the cable sheath is cut.

At what point does the 48 Gbps bandwidth limit 8K 60 Hz or 4K 120 Hz transmission on this 0.5 m length?

The 0.5 m length supports the full 48 Gbps spec, so 8K at 60 Hz and 4K at 120 Hz run without bandwidth compression or signal loss.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.