LORDWORLD
LORDWORLD HDMI 2.1 Cable 90 Degree UP Male to Male 90 Degree Down Angled 0.5M
A 0.5 m HDMI 2.1 cable with 90° up and 90° down angled male connectors, 4.0 mm diameter, 48 Gbps bandwidth for 8K at 60 Hz and 4K at 120 Hz, gold-plated contacts, backwards compatible to HDMI 1.3
- Works with all HDMI versions from 1.3 to 2.1
- 48 Gbps bandwidth supports 8K at 60 Hz and 4K at 120 Hz
- 90° up and 90° down angled connectors fit tight spaces
- 0 mm ultra-thin cable routes easily on gimbals and rigs
- Gold-plated welded connectors resist tugs and last long term
LORDWORLD HDMI 2.1 Angled Cable 0.5M
This ultra-thin HDMI cable measures 0.5 metres and features a 90-degree upward plug on one end and a 90-degree downward plug on the other. It supports the HDMI 2.1 specification with 48Gbps bandwidth for 8K resolution at 60Hz and 4K at 120Hz. Gold-plated connectors and a welded design provide a secure, durable connection.
Suits tight spaces behind wall-mounted screens
The 4.0mm diameter and sharp right-angle bends let the cable route cleanly where straight plugs would protrude or strain the port. Backwards compatibility with HDMI 1.3, 1.4, 2.0 and 2.1 covers TVs, monitors, computers and consoles such as PS3, PS4, Xbox 360 and Xbox One X. Buyers who need a longer reach or a straight connector should look at something else.
Push both plugs in until they click.
The low-profile ends slide into crowded HDMI ports without blocking adjacent sockets. The ultra-thin jacket bends easily but can kink if folded sharply during routing. Gold plating resists oxidation, yet the short length leaves no slack for repositioning devices after installation.
Highlights
- Works with all HDMI versions from 1.3 to 2.1
- 48 Gbps bandwidth supports 8K at 60 Hz and 4K at 120 Hz
- 90° up and 90° down angled connectors fit tight spaces
- 0 mm ultra-thin cable routes easily on gimbals and rigs
- Gold-plated welded connectors resist tugs and last long term
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
Which HDMI ports on my TV or monitor does this cable plug into?
It connects to any standard HDMI port and is backwards compatible with HDMI 1.3, 1.4, 2.0, 2.0a, 2.0b and 2.1 versions.
Will it carry 4K 120 Hz from a new console to an older HDMI 2.0 display?
The cable supports 48 Gbps bandwidth for 4K at 120 Hz, but the display must also have an HDMI 2.1 port to accept that signal; on HDMI 2.0 ports the link will fall back to 4K at 60 Hz.
How can I verify the cable is delivering 8K 60 Hz after I connect it?
Check the source device's output settings and the display's info menu — both should report 8K resolution at 60 Hz with no signal dropouts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



