We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green glow-in-the-dark PLA filament on a 1kg spool, 1.75mm diameter

LORDWORLD

LORDWORLD Glow in the Dark PLA Filament 1.75mm Glow Green 1kg

SKU CH-F8F9-2A6RD

Glow-in-the-dark PLA filament in 1.75 mm diameter with ±0.05 mm accuracy, supplied on a 1 kg spool with a resealable storage bag and desiccant

  • Glows after light exposure thanks to phosphorescent materials
  • Consistent extrusion from ±0.05 mm dimensional accuracy
  • 75 mm diameter fits standard 3D printers
  • Resealable bag with desiccant keeps filament dry
  • 1 kg spool supports extended print runs

Glow-in-the-Dark PLA Filament

LORDWORLD Glow in the Dark PLA Filament is a 1.75 mm polylactic acid spool that glows green after absorbing light. It suits hobbyists, educators and makers who want luminous models for display, cosplay or teaching aids without changing printer hardware. The 1 kg spool feeds standard FDM extruders and includes a resealable bag with desiccant to keep unused material dry.

Print behaviour and environment

Dimensional accuracy is held to .05 mm so layers stack cleanly on most direct-drive or Bowden setups. PLA prints at low temperatures with minimal warping and no noticeable odour, making it safe for home or classroom use. The phosphorescent additive does not increase nozzle wear beyond normal filled PLA and requires no enclosure or active cooling upgrades.

Upgrade path and limits

This spool replaces standard PLA when a visible glow effect is the primary goal. It is not suited for functional parts that need high heat resistance, impact strength or outdoor UV stability. Builders who need engineering-grade mechanical properties or a non-glowing surface finish should choose a different material.

Highlights

  • Glows after light exposure thanks to phosphorescent materials
  • Consistent extrusion from ±0.05 mm dimensional accuracy
  • 75 mm diameter fits standard 3D printers
  • Resealable bag with desiccant keeps filament dry
  • 1 kg spool supports extended print runs

Specifications

BrandLORDWORLD

Questions about this item

How do I install the 1.75 mm Glow PLA filament and what step do people often miss?

Load the filament into your 1.75 mm compatible extruder at standard PLA temperatures. The step many miss is drying the spool first and keeping it in the resealable bag with desiccant to prevent moisture from degrading glow performance.

What maintenance or replacement will this glow filament need later?

The phosphorescent material gradually loses charge, so prints need periodic exposure to sunlight or UV light to restore glow brightness. The filament itself must stay dry; replace the desiccant in the resealable bag when it saturates.

What limit appears first during a long print with this glow filament?

The abrasive phosphorescent particles wear brass nozzles faster than standard PLA, so nozzle diameter changes from the rated ±0.05 mm tolerance become the first sustained-use limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.