We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LORDWORLD

LORDWORLD eSATAp to 22Pin SATA Cable 50cm 5V 12V 2.5 3.5in

SKU CH-KJT6-8WAY2

Connects 2.5 or 3.5 inch SATA drives to an eSATAp port, supplying 5 V or 12 V power through a 50 cm cable

  • Powers 2.5 and 3.5 drives directly from an eSATAp port
  • Supplies both 5 V and 12 V through dual gold contacts
  • 50 cm cable connects eSATAp to 22-pin SATA
  • Works with 5 V-only ports for 2.5-inch drives
  • Combines eSATA and USB 2.0 in a single connector

Power for 2.5 and 3.5 drives

This cable links a Power Over eSATA port to a 22 pin SATA drive, delivering both data and power in one 50 cm run. It suits users who want to connect a bare 2.5 or 3.5 inch hard disk to a laptop or desktop without a separate power brick.

Voltage depends on the port

The host port must supply either 5 V or 12 V through its two gold contacts; a 5 V port will only run a 2.5 inch drive, while a 12 V port is required for a 3.5 inch unit. The cable itself does not convert voltage, so the host capability decides which drive sizes are usable.

Gold contacts and 22 pin fit

Gold plated contacts on the eSATAp plug maintain a stable connection for both signal and power lines. The 22 pin SATA end mates directly with standard drive connectors, allowing quick drive swaps without tools or extra cables.

Highlights

  • Powers 2.5 and 3.5 drives directly from an eSATAp port
  • Supplies both 5 V and 12 V through dual gold contacts
  • 50 cm cable connects eSATAp to 22-pin SATA
  • Works with 5 V-only ports for 2.5-inch drives
  • Combines eSATA and USB 2.0 in a single connector

Specifications

BrandLORDWORLD

Questions about this item

Should I pick the 5 V or 12 V setting for my 2.5 in drive?

Use the 5 V eSATAp port for a 2.5 in drive; the cable delivers only 5 V in that mode, so no extra power supply is needed.

What does the 22 pin SATA connector actually carry for my hard drive?

The 22 pin connector supplies both data and power (5 V or 12 V) over a single cable, eliminating a separate power adapter for 2.5 in or 3.5 in drives.

Does the eSATAp interface limit transfer speed to USB 2.0 rates?

The eSATAp port combines eSATA and USB 2.0; actual throughput depends on your host controller and drive, not the cable itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.