LORDWORLD
LORDWORLD Dual Slimline SFF-8654 8X 4 NVME PCIe 3.0 4.0 Raid Card
Connects four NVMe drives via dual Slimline SFF-8654 8X ports using PCIe 3.0 and 4.0 lanes, requiring motherboard bifurcation for full multi-drive operation
- Supports virtual RAID on Windows 10
- Requires motherboard with PCIe bifurcation
- Dual SFF-8654 8X connectors for four drives
- On-board high-power DC modules for stability
- Runs four PCIe drives at full speed simultaneously
Dual Slimline SFF-8654 adapter
This LORDWORLD card connects four NVME drives through two Slimline SFF-8654 8X ports. It targets builders who need dense PCIe storage on platforms that can split lanes. The board carries high-power DC modules for stable operation across all four slots.
Installation requires motherboard PCIe bifurcation
The card only works on motherboards that expose detachable PCI-E channels. Without lane splitting the system will see just one drive. No hardware RAID controller is present; Windows 10 storage spaces or third-party software must create virtual RAID 0 arrays.
PCIe 3.0 and 4.0 lane limits apply
Throughput depends on the host slot generation and the number of lanes allocated by the CPU or chipset. Four drives at full speed demand sufficient bifurcated lanes; fewer lanes or an older generation will throttle performance. The adapter itself adds no protocol conversion or buffering.
Highlights
- Supports virtual RAID on Windows 10
- Requires motherboard with PCIe bifurcation
- Dual SFF-8654 8X connectors for four drives
- On-board high-power DC modules for stability
- Runs four PCIe drives at full speed simultaneously
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
How can I confirm the LORDWORLD adapter is running four NVME drives at full speed after installation?
Verify each drive appears in Windows Device Manager and run a benchmark tool to confirm PCIe 3.0 or 4.0 throughput on all four Slimline SFF-8654 8X ports.
What comes in the box with the Dual Slimline SFF-8654 8X card and what must I source separately?
The card includes built-in high-power DC modules; you must supply four NVME drives, a motherboard with bifurcated PCIe lanes, and Slimline SFF-8654 cables.
Which version of the RAID card should I choose for a motherboard that supports PCIe lane splitting?
Select this Dual Slimline SFF-8654 8X model; it requires a motherboard with detachable PCI-E channels to recognise all four NVME drives simultaneously.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



