We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dual-port SFF-8088 to SFF-8643 adapter with low-profile bracket

LORDWORLD

LORDWORLD Dual Ports Mini SAS SFF-8088 to SFF-8643 Adapter with Low Profile Bracket

SKU CH-WJXZ-Q8FSZ

Connects two internal SFF-8643 SAS ports to external SFF-8088 cables at 12 Gb/s and includes both low-profile and standard brackets

  • Dual-port design connects two internal SAS HD devices
  • External SFF-8088 to internal SFF-8643 conversion for host or device side
  • Supports up to 12Gb/s SAS data transfer rate
  • Includes both low-profile and standard-profile mounting brackets
  • Passive PCBA adapter requires no external power

Dual-Port SAS Adapter

This LORDWORLD adapter connects two internal SFF-8643 ports to an external SFF-8088 connector. It fits host and device roles and ships with both low-profile and standard brackets. Builders adding external drive enclosures or JBODs to a server or workstation will use it.

12 Gb/s Transfer Rate

The adapter supports up to 12 Gb/s Mini SAS data transfer across both ports. That ceiling decides whether the link can saturate modern SAS SSDs or HDD arrays. If your controller or backplane tops out at 6 Gb/s, the adapter will still work but cannot raise the speed.

Sustained Throughput

Under continuous load the PCB maintains signal integrity at the rated 12 Gb/s without active cooling. Thermal throttling is not a factor because the passive design has no clocked logic to overheat. Performance stays flat for the length of the cable run.

Highlights

  • Dual-port design connects two internal SAS HD devices
  • External SFF-8088 to internal SFF-8643 conversion for host or device side
  • Supports up to 12Gb/s SAS data transfer rate
  • Includes both low-profile and standard-profile mounting brackets
  • Passive PCBA adapter requires no external power

Specifications

BrandLORDWORLD

Questions about this item

What does the 12 Gb/s rating mean once the adapter is installed in a server?

It sets the maximum theoretical throughput for each Mini SAS lane; actual speed depends on the connected drives, controllers and cable quality.

Which interface standard does the SFF-8088 to SFF-8643 connection use, and what does it limit?

The adapter uses the SAS interface; the SFF-8088 and SFF-8643 connectors cap the link at the 12 Gb/s Mini SAS rate.

What physical brackets are included so the card fits in a chassis?

Both a low-profile bracket and a standard full-height PCI slot bracket are supplied for flexible mounting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.