We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB with two SFF-8088 ports and two SFF-8087 ports, metal PCI bracket attached

LORDWORLD

LORDWORLD Dual Ports Mini SAS SFF-8088 to SFF-8087 Adapter with PCI Bracket

SKU CH-T1F2-SSGGN

Connects external 26-pin Mini SAS host ports to internal 36-pin device connectors at up to 6Gb/s with low-profile and standard brackets

  • Connect external 26-pin SAS hosts via SFF-8088 ports
  • Link internal 36-pin SAS devices through SFF-8087 connectors
  • Achieve 6Gb/s Mini SAS data transfer speeds
  • Works with SFF-8087 to SATA and SAS octopus cables
  • Fits low-profile and standard PCI brackets

Dual-Port SAS Adapter for External-to-Internal

This LORDWORLD adapter bridges external SFF-8088 host connectors with internal SFF-8087 device ports across two channels. It suits builders adding direct-attached storage to servers or workstations where the controller resides outside the chassis. The PCB-mounted female connectors accept standard Mini SAS cables without extra cabling.

Sustained 6Gb/s Throughput Across Both Ports

Each lane maintains up to 6Gb/s transfer rates during continuous read or write workloads such as backup streams or RAID rebuilds. The passive trace layout avoids active components that could throttle under prolonged saturation. Performance scales with the attached controller and drive topology rather than the adapter itself.

Low-Profile and Standard Brackets Included

The board ships with both low-profile and full-height PCI brackets for flexible mounting in 1U racks or full-tower cases. Dual 26-pin SFF-8088 receptacles face the rear panel while dual 36-pin SFF-8087 headers route internally to octopus or Mini SAS cables. No external power is required.

Highlights

  • Connect external 26-pin SAS hosts via SFF-8088 ports
  • Link internal 36-pin SAS devices through SFF-8087 connectors
  • Achieve 6Gb/s Mini SAS data transfer speeds
  • Works with SFF-8087 to SATA and SAS octopus cables
  • Fits low-profile and standard PCI brackets

Specifications

BrandLORDWORLD

Questions about this item

Does the SFF-8088 adapter generate noticeable heat or draw extra power when running continuously?

The adapter is a passive PCBA with no active components, so it adds negligible heat and draws no additional power beyond the signal path.

What cables or host controller do I need already to connect external SFF-8088 devices through this bracket?

You need an external Mini SAS cable with 26-pin SFF-8088 connectors and a host controller or HBA that presents an SFF-8088 port.

Will the internal SFF-8087 ports work with my older 3 Gb/s SAS or SATA drives through octopus cables?

Yes, the 36-pin SFF-8087 connectors support SFF-8087 to SATA or SAS octopus cables at up to 6 Gb/s, so 3 Gb/s drives will negotiate down automatically.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.