We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thirty small BNC male balun connectors with screw terminals in a clear bag

LORDWORLD

LORDWORLD BNC Male Balun Connector CAT5 CAT6 CAT7 Pack of 30

SKU CH-RMB3-GNSCA

Pack of 30 BNC male balun connectors convert CAT5, CAT6 or CAT7 twisted-pair cable to coaxial video for CCTV cameras, with 5.5 mm × 2.1 mm power plugs and tool-less screw terminals

  • Transmit video over twisted-pair cable using BNC male balun connectors
  • Power cameras through 5.5 mm x 2.1 mm female plug on each balun
  • Install without crimping or splicing using only a small screwdriver
  • Compatible with CAT5, CAT6 and CAT7 unshielded twisted-pair wiring
  • Pack of 30 connectors covers multiple camera locations

BNC Male Balun Pack for CCTV Installers

This pack contains thirty BNC male balun connectors that convert coaxial camera signals to run over CAT5, CAT6 or CAT7 twisted-pair cable. They are intended for security installers who need to extend analogue or HD-over-coax video without pulling new coaxial cable. Each unit includes a 5.5 mm by 2.1 mm female power plug so the camera can be powered through the same run. The connectors are sold new and ready for immediate use.

Transmission Distance Limited by Cable Category

Video reach depends on the twisted-pair category chosen: CAT5, CAT6 and CAT7 each impose their own practical distance ceiling for analogue and HD-over-coax signals. The balun itself does not amplify or equalise the signal, so runs beyond the cable’s rated limit will degrade picture quality. No power injection or active circuitry is present to overcome attenuation. Installers must plan cable lengths according to the specific category deployed.

Screw-Terminal Installation Without Crimping

Each balun uses small screw terminals that accept solid or stranded conductors; a small screwdriver is the only tool required. No crimping tool, compression tool or soldering iron is needed, which speeds up field terminations. The most common issue is loose terminal screws causing intermittent video or power loss, so every connection should be tug-tested after tightening. Stripping too much insulation can also short adjacent terminals.

Highlights

  • Transmit video over twisted-pair cable using BNC male balun connectors
  • Power cameras through 5.5 mm x 2.1 mm female plug on each balun
  • Install without crimping or splicing using only a small screwdriver
  • Compatible with CAT5, CAT6 and CAT7 unshielded twisted-pair wiring
  • Pack of 30 connectors covers multiple camera locations

Specifications

BrandLORDWORLD

Questions about this item

Which pack size should I choose: 10, 20, 30, 50 or 100 units?

Select the pack that matches the number of cameras you are wiring; each unit converts one camera’s UTP feed to a BNC male connector with a 5.5 mm × 2.1 mm power plug.

What does the 5.5 mm × 2.1 mm power plug do once the balun is installed?

It carries DC power to the camera through the same connector block, so a single screw-terminal connection handles both video and supply without tapping or crimping.

Which cable categories does the BNC male balun support in practice?

The connector is rated for CAT5, CAT6 and CAT7 unshielded twisted-pair cable, converting the UTP signal to a standard BNC male output for DVR or monitor input.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.