We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 4-pin Micro-Fit male-to-male power cable, 60 cm

LORDWORLD

LORDWORLD ATX Micro Fit 4-Pin Male to Male Cable 60cm 20AWG 3.0mm Pitch

SKU CH-WWRD-D2WXP

Connects a 4-pin 12 V Micro Fit 3.0 mm power supply using 20 AWG UL1007 wire over 60 cm

  • Connects 4-pin 12V power supply with 3.0mm pitch Micro Fit
  • 60cm length reaches components in standard ATX cases
  • 20AWG UL1007 wire handles 12V current safely
  • Male-to-male design links supply directly to device
  • Micro Fit connector ensures secure 4-pin power delivery

ATX Micro Fit 4-Pin Power Cable

This 60 cm cable carries a 12 V ATX supply through a Molex Micro Fit connector with a 3.0 mm pitch. It uses 20 AWG UL1007 wire and terminates in a 4-pin male plug at each end. The assembly is built for internal power distribution in compatible chassis or custom builds. Condition is new.

Micro Fit 3.0 mm Pitch Connector Limit

The Micro Fit interface is keyed to a 3.0 mm pitch, so it will not mate with standard ATX 4-pin headers that use a different spacing. Current capacity is constrained by the 20 AWG conductors and the connector rating. Cable length is fixed at 60 cm, which limits routing options in larger enclosures.

Check Power Supply Connector Before Ordering

Verify that your power supply presents a 4-pin 12 V output with a Micro Fit 3.0 mm pitch header. Confirm the pin-out matches the male-to-male wiring of this cable. Ensure the 60 cm reach suits your component layout without strain.

Highlights

  • Connects 4-pin 12V power supply with 3.0mm pitch Micro Fit
  • 60cm length reaches components in standard ATX cases
  • 20AWG UL1007 wire handles 12V current safely
  • Male-to-male design links supply directly to device
  • Micro Fit connector ensures secure 4-pin power delivery

Specifications

BrandLORDWORLD

Questions about this item

Should I choose the 60 cm length or a different cable for my ATX 12 V connection?

The cable is 60 cm long with 20 AWG UL1007 conductors, sized for a standard ATX 12 V Micro Fit 3.0 mm pitch header.

What does the 20 AWG rating mean once the cable is installed in my build?

20 AWG UL1007 wire handles the current required by a 4-pin 12 V ATX connection while keeping voltage drop low over the 60 cm run.

Which header does the 3.0 mm pitch Micro Fit connector mate with in practice?

It plugs directly into a power supply's 4-pin 12 V Micro Fit header with a 3.0 mm pitch; the male-to-male ends join two such headers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.