We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black VGA cable with 90 degree angled connector on one end, straight on the other

LORDWORLD

LORDWORLD 90 Degree VGA Cable Male to Male 1080P 60Hz 1m 3.3ft

SKU CH-1GS6-P6YQW

A 90-degree angled VGA male-to-male cable extends displays to monitors or projectors at 1080P 60Hz with foil shielding

  • Stable video signal thanks to foil-shielded 3COAX+6C construction
  • Sharp 1080P visuals at 60 Hz refresh rate
  • 90-degree angled connector fits tight port spaces
  • Male-to-male design extends displays to monitors, TVs or projectors
  • Standard 15-pin D-type VGA interface ensures broad device compatibility

Right-angled VGA cable for tight ports

This 90-degree VGA male-to-male cable connects a computer or laptop to a monitor, projector or LCD TV when space behind the device is limited. The down-angled connector fits against the chassis so the cable runs parallel to the back panel. Foil shielding protects the analogue signal from electromagnetic interference. It supports 1080P resolution at 60 Hz over a 1 m length.

Replaces a straight VGA lead that blocks adjacent

Swap a straight connector for this angled version when a graphics card, docking station or projector sits flush against a wall or rack rail. The 15-pin D-sub interface matches the standard VGA layout found on most legacy graphics outputs. The jump is worth it when cable strain or bent pins risk signal loss on the existing run.

Check port orientation

Ensure the source and display both present female VGA sockets; this cable carries male plugs on both ends. Verify that a down-angled plug clears nearby connectors rather than colliding with them. Confirm the 1 m reach covers the gap between devices without tension. Buyers needing longer runs or digital HDMI and DisplayPort signals should look elsewhere.

Highlights

  • Stable video signal thanks to foil-shielded 3COAX+6C construction
  • Sharp 1080P visuals at 60 Hz refresh rate
  • 90-degree angled connector fits tight port spaces
  • Male-to-male design extends displays to monitors, TVs or projectors
  • Standard 15-pin D-type VGA interface ensures broad device compatibility

Specifications

BrandLORDWORLD

Questions about this item

How much clearance does the 90 degree angled connector need behind my monitor?

The down-angled male plug sits flush against the panel, so only the cable thickness protrudes; allow roughly the cable diameter plus a few millimetres for the bend radius.

Which end plugs in first when I route the cable through a tight desk grommet?

Feed the straight male end through the grommet first, then connect the angled end to the monitor; the straight connector is smaller and passes through more easily.

How often should I check the foil shielding for wear if the cable runs across a chair mat?

Inspect the jacket every few months; if the foil layer is exposed or the cable feels stiff at the bend, replace it to keep 1080P@60hz signal quality.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.