LORDWORLD
LORDWORLD 90 Degree Down Angled FPV Micro HDMI Male to Mini HDMI FPC Flat Cable 20cm 1080p 60hz
A 20 cm ultra-flexible FPC flat cable with 90-degree down-angled micro HDMI male and mini HDMI male connectors for lightweight gimbal FPV video at 1080p 60 Hz, supplied unassembled
- 90-degree down-angled connectors keep the cable clear of gimbal arms
- Ultra-flexible FPC flat cable prevents stiff-cable interference on lightweight brushless gimbals
- Micro HDMI male to Mini HDMI male fits GoPro-series cameras for FPV aerial photography
- Supports 1080p at 60 Hz video transmission for live-view feeds
- 20 cm length gives a tidy run without excess slack on multicopter frames
FPV Micro HDMI Cable for Gimbal Use
This 20 cm flat cable links a micro HDMI camera to a mini HDMI video transmitter. The 90 degree down-angled connectors keep the wire close to the frame on multicopter builds. It supports 1080p at 60 Hz for live aerial photography feeds.
Verify Port Types Before Ordering
Confirm that your camera has a micro HDMI socket and your transmitter or monitor accepts a mini HDMI plug. The supplier notes that stiff cables can upset lightweight gimbal balance, so check clearance around the mounting point. Assembly is required after delivery.
Soft FPC Design for Brushless Gimbals
The flexible flat cable routes easily around tight motor pods without adding torque to the gimbal axis. Both ends arrive detached for custom routing through carbon-fibre frames. No extra adapters are needed once the connectors are seated.
Highlights
- 90-degree down-angled connectors keep the cable clear of gimbal arms
- Ultra-flexible FPC flat cable prevents stiff-cable interference on lightweight brushless gimbals
- Micro HDMI male to Mini HDMI male fits GoPro-series cameras for FPV aerial photography
- Supports 1080p at 60 Hz video transmission for live-view feeds
- 20 cm length gives a tidy run without excess slack on multicopter frames
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What comes in the box and do I need any tools to finish the cable?
The package contains the flat cable and both 90 degree angled connectors shipped separately; you must assemble them yourself following the included guide. No extra tools are mentioned.
Which connector orientation should I pick for a gimbal that needs the cable to point straight down?
Both ends are 90 degree down angled, so the cable exits each port toward the same side; choose this version when the gimbal layout requires a downward bend at both the Micro HDMI and Mini HDMI ports.
Will the 1080p 60hz rating hold on a 20cm run with a GoPro feeding a video transmitter?
The cable is specified for 1080p at 60hz over its 20cm length and is designed for soft, low drag routing on brushless gimbals used with GoPro cameras.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



