We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black centrifugal blower fan with circular outlet and wire leads

LORDWORLD

LORDWORLD 50mm Centrifugal Turbo Blower Fan 12V 1.83W 5020

SKU CH-KZG1-SQ43M

A 50 mm centrifugal blower moves air through projectors and tight enclosures at 12 V and 1.83 W

  • 50 mm centrifugal blower directs focused airflow for projector cooling
  • 12 V DC operation with 1.83 W power draw keeps energy use low
  • 5020 form factor fits tight equipment bays without modification
  • Model EF50201B2-Q020-S99 identifies exact replacement for service teams

Compact 50mm Centrifugal Blower

The LORDWORLD 5020 centrifugal turbo blower measures 50mm across and runs on 12V power. It draws 1.83W while producing a focused airflow suited for projector cooling or similar tight enclosures. The EF50201B2-Q020-S99 model uses a centrifugal design to direct air through restricted channels. This new gadget fits applications that require a small radial fan.

Buyers needing targeted spot cooling in confined

This blower suits technicians repairing projectors or building custom devices where a 50mm radial form factor is specified. It is not for users who need high-volume airflow across open heatsinks or case ventilation. Builds requiring larger diameter fans or different voltage ratings should look at other options.

Highlights

  • 50 mm centrifugal blower directs focused airflow for projector cooling
  • 12 V DC operation with 1.83 W power draw keeps energy use low
  • 5020 form factor fits tight equipment bays without modification
  • Model EF50201B2-Q020-S99 identifies exact replacement for service teams

Specifications

BrandLORDWORLD

Questions about this item

How do I install the 12V 50mm centrifugal blower in a projector and what step is often missed?

Connect the 12V supply to the two-pin lead, seat the 5020 housing in the duct, then secure the four mounting tabs; the step most people skip is verifying the blower exhaust aligns with the projector heat-sink fins before tightening.

What maintenance will the EF50201B2-Q020-S99 blower need over its life?

Every few months use low-pressure air to clear dust from the 50mm impeller blades and the intake grille; if bearing noise appears after extended 1.83W operation, replace the entire 5020 unit as the motor is not serviceable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.