We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter card with four SATA ports and four M.2 slots, PCIe x1 edge connector

LORDWORLD

LORDWORLD 4-Port SATA 3.0 NGFF B+M to PCIe 1x Adapter ASM1064 Hot Swap

SKU CH-KVMJ-7PZV5

Adds four SATA 3.0 ports via a PCIe 1x slot using the ASM1064 chipset, supports Key B+M SSDs in 2230, 2242, 2260 and 2280 sizes with hot-swap capability

  • Connect four SATA NGFF SSDs through a single PCIe 1x slot
  • Four SATA 3.0 ports let each drive run at full interface speed
  • Hot-swap support lets you change drives without powering down the system
  • Built-in power management reduces energy draw during SSD operation
  • Fits 2230, 2242, 2260 and 2280 Key B+M modules for wide drive choice

SATA 3.0 adapter with ASM1064

The LORDWORLD card adds four SATA 3.0 ports through a single PCIe 1x slot using the ASM1064 controller. It accepts NGFF Key B+M SSDs in 2230, 2242, 2260 and 2280 lengths. Hot-swap and hot-plug support lets you change drives without powering down. Power management functions help reduce energy draw during operation.

Desktop builders adding SATA M.2 drives

Suits builders who want to run multiple SATA-based NGFF SSDs from one expansion slot. The card only works with Key B+M SATA drives, so systems that require a different keying or protocol cannot use it. Laptops and small-form-factor chassis without a free PCIe 1x slot are also unsuitable.

ASM1064 controller on PCIe 1x

The ASM1064 chip provides the four SATA 3.0 connections over a single PCIe 1x link. This controller choice determines the maximum throughput and compatibility with the listed drive lengths. Verify that your motherboard has an available PCIe 1x slot before purchase.

Highlights

  • Connect four SATA NGFF SSDs through a single PCIe 1x slot
  • Four SATA 3.0 ports let each drive run at full interface speed
  • Hot-swap support lets you change drives without powering down the system
  • Built-in power management reduces energy draw during SSD operation
  • Fits 2230, 2242, 2260 and 2280 Key B+M modules for wide drive choice

Specifications

BrandLORDWORLD

Questions about this item

How do I install this adapter and what step is often missed?

Insert the card into a free PCIe 1x slot, secure it with the bracket screw, then connect up to four SATA 3.0 cables to the onboard ports; the step many miss is enabling hot-swap support in the system BIOS before use.

What maintenance or replacement will this adapter need later?

The ASM1064 controller requires no routine maintenance; only the attached SATA NGFF Key B+M drives in 2230, 2242, 2260 or 2280 sizes may need replacement over time.

What limit appears first under sustained use?

The single PCIe 1x link caps combined throughput from all four SATA 3.0 ports, so sustained transfers across multiple drives will hit that bandwidth ceiling first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.