We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular fan controller with six 4-pin ports and a silver control knob

LORDWORLD

LORDWORLD 4-Pin 12V PWM Fan Controller 6 Fans SATA DC 5525 60W Knob

SKU CH-6PQA-RF2Z6

Controls up to six 4-pin PWM fans from a single SATA or DC 5525 power source with a manual knob adjusting duty cycle from 1 to 99 per cent

  • Controls six 4-pin PWM fans from one knob
  • Dual power input via SATA or DC 5.5×2.5 mm jack
  • Delivers up to 60 W total across all ports
  • Each channel handles 2 A while combined draw stays within 5 A
  • PWM duty cycle adjustable from 1 % to 99 %

LORDWORLD 6-Fan PWM Controller

This controller manages up to six 4-pin PWM fans from a single knob. It accepts power from a SATA connector or a DC 5.5×2.5 mm 5525 plug at 12 V. Total output is capped at 60 W with a 5 A combined limit, while each port can deliver up to 2 A. The duty cycle adjusts from 1 % to 99 % for fine speed control.

Builders needing simple analog speed control

Suits systems where software fan curves are unavailable or unwanted, and where all fans use standard 4-pin connectors. Not for setups that rely on 3-pin or 2-pin fans, as the hub does not support voltage-based control. Also unsuitable for configurations requiring per-fan automatic curves or motherboard header synchronization.

Integrates into any 12 V SATA

Connect the hub to a spare SATA power lead or a 5525 DC source, then plug in up to six PWM fans. The single knob sets a global PWM duty cycle, freeing motherboard headers for other devices. Ensure the combined fan draw stays within the 5 A total limit so the controller operates within its rated 60 W envelope.

Highlights

  • Controls six 4-pin PWM fans from one knob
  • Dual power input via SATA or DC 5.5×2.5 mm jack
  • Delivers up to 60 W total across all ports
  • Each channel handles 2 A while combined draw stays within 5 A
  • PWM duty cycle adjustable from 1 % to 99 %

Specifications

BrandLORDWORLD

Questions about this item

What power connector does my PSU need to run this controller?

The unit accepts either a standard SATA 12 V plug or a 5.5 × 2.5 mm (5525) DC jack, so one of those must be free on your power supply.

Will my existing 3-pin case fans work with the six 4-pin headers?

No — the controller only drives 4-pin PWM fans; 3-pin or 2-pin fans are not compatible and will not spin or report speed correctly.

How do I verify the PWM duty cycle is actually changing when I turn the knob?

With fans connected, rotate the knob and watch each fan’s RPM in BIOS or monitoring software; the speed should scale smoothly across the 1 % to 99 % duty-cycle range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.