LORDWORLD
LORDWORLD 4-in-1 USB 2.0 to DC 5.5x2.5mm 5.5x2.1mm 4.0x1.7mm 3.5x1.3mm Cable 1.5m
A 1.5 m USB 2.0 cable powers 5 V devices through four interchangeable barrel tips
- Four barrel tips fit many 5 V devices
- 22 AWG pure copper conductor carries stable power
- 5 m length gives flexible placement
- USB Type-A input works with common 5 V sources
- Centre-positive polarity matches standard DC jacks
Versatile 4-in-1 DC power cable
This LORDWORLD cable converts a single USB Type-A 5 V source into four common barrel connectors: 5.5 × 2.5 mm, 5.5 × 2.1 mm, 4.0 × 1.7 mm and 3.5 × 1.3 mm. The 1.5 m, 22 AWG pure-copper lead is intended for powering small 5 V devices such as routers, hubs or LED strips from a USB port or charger. Condition is new.
Suits owners of multiple 5 V centre-positive devices
Users who need to run several 5 V gadgets from one USB supply will find the four tips convenient. Buyers whose equipment requires 12 V, 9 V or any voltage other than 5 V cannot use this cable. Devices with centre-negative polarity or proprietary connectors are also incompatible. The cable does not regulate voltage; it only passes the USB 5 V through.
Critical spec: 5 V centre-positive requirement
The supplier stresses that the original power source must be 5 V with internal positive and external negative. If the source is 12 V or any other voltage, the connected device can be damaged. Matching the 5 V input to the 5 V output is the single specification that decides whether this cable is the right part.
Highlights
- Four barrel tips fit many 5 V devices
- 22 AWG pure copper conductor carries stable power
- 5 m length gives flexible placement
- USB Type-A input works with common 5 V sources
- Centre-positive polarity matches standard DC jacks
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
Which of the four barrel sizes matches my device?
The cable includes 5.5 x 2.5 mm, 5.5 x 2.1 mm, 4.0 x 1.7 mm and 3.5 x 1.3 mm tips so you can select the one that fits your DC jack.
What does the 5 V USB input actually deliver to my hardware?
It passes 5 V DC from a USB Type-A port straight through to the chosen barrel connector, so the connected device must also require 5 V with centre-positive polarity.
How does the USB 2.0 Type-A interface limit the power I can draw?
The USB 2.0 Type-A plug is rated for 5 V only; the cable cannot step voltage up or down, so any source above 5 V will damage the attached equipment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



