We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black power cords with piggyback plugs and C13 connectors

LORDWORLD

LORDWORLD 2 ft NEMA 5-15P to C13 + 5-15R Piggyback Power Cord 14AWG 15A 125V UL CUL Pack of 2

SKU CH-9SXY-EWYMK

Piggyback cord powers a C13 device while keeping a 5-15R outlet free, 14AWG copper, UL CUL certified, 15A 125V, pack of two

  • UL CUL certified for safe 15A 125V operation
  • 14AWG pure copper cable tested 100% open short voltage
  • Piggyback design keeps outlet free for daisy chain
  • 2 ft length suits tight pro audio DJ racks
  • Pack of two cords ready for immediate use

Dual-outlet piggyback cord

Each cord in this two-pack splits a single NEMA 5-15P plug into a C13 connector and a pass-through 5-15R receptacle. The arrangement lets you power a device with a C13 inlet while keeping the wall outlet available for another plug. It is intended for audio, DJ and similar rack gear that uses IEC C13 inputs.

Rated for continuous 15 A at 125 V

The SJT 14 AWG three-conductor cable uses pure copper conductors and carries UL and CUL certification. Every unit is 100 % open, short and voltage tested before shipping, so the assembly maintains its rated current without overheating during extended sessions.

Simple plug-in installation

No tools are required; connect the 5-15P end to a standard North American outlet, attach the C13 to your equipment and use the 5-15R for a second device. The short 0.6 m length limits reach, so it suits rack-adjacent power strips rather than distant wall sockets. The piggyback moulding adds bulk that may block adjacent receptacles on dense power strips.

Highlights

  • UL CUL certified for safe 15A 125V operation
  • 14AWG pure copper cable tested 100% open short voltage
  • Piggyback design keeps outlet free for daisy chain
  • 2 ft length suits tight pro audio DJ racks
  • Pack of two cords ready for immediate use

Specifications

BrandLORDWORLD

Questions about this item

Does the 14 AWG cord generate noticeable heat when run continuously at the 15 A 125 V rating?

The 14 AWG pure-copper conductors are rated for 15 A at 125 V and are 100 % tested for open, short and voltage faults, so normal continuous loads stay within safe temperature limits.

What outlet and device connectors must I already have to use this piggyback cable?

You need a standard NEMA 5-15P wall receptacle and one device with a C13 inlet plus a second device with a NEMA 5-15R plug to occupy the piggyback outlet.

Can I plug this into an older NEMA 5-15R strip and still use the C13 tail for newer gear?

Yes, the 5-15P male fits legacy 5-15R strips while the C13 connector and extra 5-15R piggyback outlet serve both newer and older equipment simultaneously.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.