LORDWORLD
LORDWORLD 1ft 0.3m 18AWG 10A 125V Polarized NEMA 1-15P to 1-15R Extension Power Cable
A 1 ft polarized NEMA 1-15P to 1-15R extension cable rated 10 A at 125 V with 18 AWG double-shielded conductors
- Polarised plugs on both ends ensure correct orientation
- UL and cUL certification confirms safety compliance
- Double-shielded 18 AWG construction resists wear and interference
- One-foot length adds reach for lamps and chargers
- Single cable supplied, ready to use
Polarized NEMA 1-15 extension cord
This LORDWORLD cable adds one foot of reach between a standard North American wall outlet and any two-prong device. Both the male plug and female receptacle are polarized so the wide blade always aligns with the neutral slot. The cord carries UL and cUL certification for 10 A at 125 V. It suits lamps, phone chargers and similar low-draw equipment.
Replaces short factory leads
The 0.3 m length bridges the gap when a device’s own cord falls short of the socket. It is worth using whenever the existing cable is too short but a longer multi-outlet strip would be excessive. The 18 AWG conductors handle the same 10 A rating as the original supply cord. Do not use it for appliances that draw more than 10 A or require a grounding pin.
Fits tight spaces behind furniture
The molded PVC jacket and double insulation keep the profile slim enough to run along baseboards or under carpets. Polarized ends prevent accidental reverse insertion on sensitive electronics. The single female receptacle frees the wall outlet for another plug while extending only the device that needs it. It does not add surge protection or additional outlets.
Highlights
- Polarised plugs on both ends ensure correct orientation
- UL and cUL certification confirms safety compliance
- Double-shielded 18 AWG construction resists wear and interference
- One-foot length adds reach for lamps and chargers
- Single cable supplied, ready to use
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
Will the 1 ft polarized NEMA 1-15P plug fit behind tight furniture?
The cable is 1 ft (0.3 m) long with a moulded polarized NEMA 1-15P plug and matching 1-15R socket, so it adds only a short reach behind furniture.
How do I install the cord without reversing the polarized blades?
Align the wider blade on the male NEMA 1-15P plug with the wider slot on the female 1-15R end; forcing it the wrong way rounds the blades and breaks polarization.
When should I replace the 18 AWG NISPT-2 cord?
Replace it if the PVC jacket shows cracks, the moulded plugs feel loose, or the insulation is cut — damage on an 18 AWG 10 A 125 V cord can cause overheating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



